Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
A leak at 2 a.m. doesn't wait for business hours, and neither do we. If water's getting into your home or business in Canton Valley, Connecticut, call and we'll line up a nearby specialist who brings the extraction gear and dehumidifiers to deal with it properly.
Call Now: (888) 596-0163Someone picks up, day or night.
That's older than 51% of the 28,807 US places we track. Older homes often have pipes and drains that have been patched more than once.
88% of the 30,291 places we track come out drier. That's plenty of water to find a tired roof, a blocked downspout or a low spot by the foundation.
Check your drains and the slope around the house ahead of October. It takes an afternoon, and it can save a lot of drying later.
Before anyone arrives
These are the steps that help most before anyone gets there. Do what you safely can.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
You've got about 24 to 48 hours to start drying before rot and mold become the bigger problem.
Typical build year
A lot of plumbing from these years has reached the end of its life. Galvanized steel narrows from the inside as it rusts, so weak water pressure can be a warning, not just an annoyance. Cast iron drains can crack, and fittings where old meets new are often the first thing to go.
Have a look under the kitchen and bathroom sinks and around the water heater. Any rust, drips or green staining is worth having a plumber check before it turns into a call to us.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Northeast
Cold drives much of the damage here. Long freezes split pipes in outside walls, ice dams force meltwater under shingles, and nor'easters bring heavy snow, rain and coastal flooding together. The remains of a tropical storm can also stall over the region and flood rivers far inland.
This is some of the oldest housing in the country. Stone and brick foundations let groundwater seep through, plaster walls and hardwood floors need slow drying, and radiators and steam systems add old pipework that can fail with little warning.
Glacial soil and shallow bedrock limit how much water the ground can take. Rain and snowmelt move along the rock and into stone foundations, which is why many cellars here get wet even when no pipe has failed.
In a cold house, water hangs around. It barely leaves chilled drywall, stone or hardwood on its own, so winter jobs often bring in controlled heat along with the dehumidifiers to get things moving again.
When you call
We'll ask where you are, what happened and whether the water's still running. That takes a couple of minutes. Then we'll connect you with a specialist from our network who works in Capitol Planning Region, and you can ask them when they can be there before you hang up. Homes and commercial buildings are both fine.
Expect a walk through the house with a thermal camera and a moisture meter, because what you can see is usually only part of it. The specialist will also tell you which of the three categories you've got. Category 1 water is clean, Category 2 is dirty, and Category 3 is sewage or floodwater. That last one changes the job, with plastic containment around the work area and negative air machines pushing air through HEPA filters.
Then comes the drying, and this is the part people underestimate. Standing water comes out first, with truck-mounted or portable units. Air movers then push moist air off wet surfaces, while low grain refrigerant (LGR) dehumidifiers pull the water out of the air. If your house runs cold or the materials are dense, desiccant units can take over. Each day, readings of temperature and humidity, known as psychrometric readings, show whether the machines are keeping up.
So how do you know it's done? It's done when the numbers say so. A dry baseline from untouched materials in your house is the target, and each wet area has to reach it before the equipment leaves. It follows the IICRC S500 standard, and you get a record of the readings for your insurance claim.
More than you'd think, if it's caught early. Carpet soaked with clean water can often be dried in place once the pad's been pulled. Hardwood is worth trying to save too, with floor drying mats and slow drying, though it may need refinishing. Drywall that's wet only at the base can be cut a little above the waterline instead of being replaced to the ceiling, which is what a flood cut is.
Contaminated water is where the rules get strict. Sewage or floodwater means the carpet and pad come out, along with wet insulation, and what's left gets an antimicrobial treatment. It's also not safe to relight a gas appliance that's been underwater until someone's checked it, and a soft floor needs a look before anyone stands on it.
We take calls from all over Canton Valley and the rest of Capitol Planning Region, for houses, apartments and commercial buildings. If you're not sure you're close enough, just ask.
We aim to have a specialist on the way the same day, often within hours. When a big storm hits all of Capitol Planning Region at once, it can take longer, so it pays to call early. The steps above will help while you wait.
A small spill of clean water on a hard floor? Sure. Towels and a fan will do it. But if the water's in the walls, the carpet pad or the subfloor, or it came from a sewer or a flood, you'll want it extracted and properly dried. What you can't see is what keeps causing damage.
Usually three to five days for the drying alone. The specialist can tell you more after the first readings. Materials such as hardwood, plaster and concrete hold on to water longer, and repairs can only begin when they're dry.
Usually, with clean water and a fast start. Drying mats sit on hardwood and draw the moisture out slowly so the boards don't split. Sanding and refinishing can fix any cupping that's left. Carpet needs a new pad, and it can't be saved at all after sewage or floodwater.
Often, but not always. Insurers tend to pay for sudden leaks and not for long-term seepage. Flooding from outside needs its own policy. Call your insurance company early, and keep the moisture logs and photos, since they make the claim much easier.
Tell us what's happening, and we'll line up a specialist from our network in Capitol Planning Region. That's all you need to do for now.