Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
A leak at 2 a.m. doesn't wait for business hours, and neither do we. If water's getting into your home or business in Botsford, Connecticut, call and we'll line up a nearby specialist who brings the extraction gear and dehumidifiers to deal with it properly.
Call Now: (888) 596-0163Someone picks up, day or night.
Housing here is newer than in 79% of the 28,807 places on our list. So you're less likely to have old pipes, and more likely to have plastic lines and fittings that are starting to age.
62% of the 30,291 places we track come out drier. That's plenty of water to find a tired roof, a blocked downspout or a low spot by the foundation.
A look at the roof, gutters and downspouts before August is the cheapest repair you'll ever make.
Before anyone arrives
No need to get it perfect. These are the things that make the biggest difference, in order.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
The clock on mold is roughly 24 to 48 hours, which is why we'd rather hear from you early.
Typical build year
Homes from these years often had plastic plumbing put in, and one type stands out. Polybutylene, usually gray and often stamped PB, was widely used until the mid 1990s and is known for failing without warning, usually at the fittings.
Check the exposed lines near your water heater and under the sinks. While you're there, look at the tank's age on its label. Eight to twelve years is about all you can expect, and when one fails, it fails on the floor.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Northeast
You get a bit of everything here: long freezes that burst pipes, ice dams that send water through ceilings, and big coastal storms. Rivers can rise fast when heavy rain falls on melting snow, or when a tropical system stalls overhead.
This is some of the oldest housing in the country. Stone and brick foundations let groundwater seep through, plaster walls and hardwood floors need slow drying, and radiators and steam systems add old pipework that can fail with little warning.
Glacial soil and shallow bedrock limit how much water the ground can take. Rain and snowmelt move along the rock and into stone foundations, which is why many cellars here get wet even when no pipe has failed.
Water won't leave a cold wall quickly. Bringing in controlled heat warms the materials and speeds things up, and dehumidifiers catch what comes out. That's especially useful with stone foundations and old plaster.
When you call
First we'll want to know three things: where you are in Botsford, where the water came from and if it's stopped. From there, we'll connect you with a local specialist from our network, so you're speaking to someone who works in Western Connecticut Planning Region. That goes for homeowners, landlords and businesses alike.
Before any equipment goes in, the specialist needs to know two things: how far the water got, and how dirty it is. Thermal cameras and moisture meters answer the first. For the second, there are three answers: Category 1, clean water, Category 2, dirty water, or Category 3, sewage and floodwater. With Category 3, plastic containment goes up and negative air machines with HEPA filters keep your house's air clean.
Getting the water out is the quick part. A truck-mounted or portable extractor handles that. After that, air movers sweep across wet surfaces, and low grain refrigerant (LGR) dehumidifiers take that moisture out of the room. In cold or dense spaces, desiccant dehumidifiers work better. You'll hear the machines day and night for a while, and daily psychrometric readings of the air show that they're working.
So how do you know it's done? It's done when the numbers say so. A dry baseline from untouched materials in your house is the target, and each wet area has to reach it before the equipment leaves. It follows the IICRC S500 standard, and you get a record of the readings for your insurance claim.
It depends mostly on how fast drying starts and how dirty the water was. With clean water, carpet can usually stay and the pad goes. Hardwood often comes back with drying mats and patience, and sanding can take care of what's left. Walls may only need a flood cut, which removes the bottom section of drywall, so the rest stays put.
Sewage and floodwater are a different story. Carpet they've touched has to go, and what stays gets cleaned and treated with an antimicrobial. Two more things to check before you use the room again: a gas appliance that sat in water, and any floor that feels soft underfoot.
From one end of Botsford to the other, and on through Western Connecticut Planning Region, the first step is the same call. Homes and businesses are both covered.
Often within hours. Our network covers Western Connecticut Planning Region, and we'll look for whoever can reach you soonest. Storms are the exception, because every crew in the area gets busy, so please don't wait to see if it gets worse.
A small spill of clean water on a hard floor? Sure. Towels and a fan will do it. But if the water's in the walls, the carpet pad or the subfloor, or it came from a sewer or a flood, you'll want it extracted and properly dried. What you can't see is what keeps causing damage.
Most homes take three to five days of drying once the water's out. Dense materials such as hardwood and plaster can take longer, and any rebuilding comes afterward.
Usually, with clean water and a fast start. Drying mats sit on hardwood and draw the moisture out slowly so the boards don't split. Sanding and refinishing can fix any cupping that's left. Carpet needs a new pad, and it can't be saved at all after sewage or floodwater.
It usually depends on where the water came from. A homeowners policy usually covers a burst pipe. Outside flooding needs separate flood insurance, and sewer backup often needs an add-on. It's worth reading your policy, and it's worth having those photos.
It's quick. Give us your address, and we'll connect you with a local specialist who can tell you when they'll be there.