Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
You've found water and you're not sure how bad it is. That's normal, and it's why you can just call. Tell us what's going on in Ball Pond, Connecticut, and we'll connect you with a local restoration specialist who can bring pumps, truck-mounted extraction and dehumidifiers to your door.
Call Now: (888) 596-0163Someone picks up, day or night.
Housing here is older than in 68% of the 28,807 places on our list. Age alone won't cause a leak, but it does mean more pipe that's been in the wall a long time.
That's wetter than 73% of the 30,291 places we track. It's enough that a clogged gutter or a poor slope by the wall will show itself sooner or later.
If you've been meaning to clear the gutters, do it before September comes around.
Before anyone arrives
No need to get it perfect. These are the things that make the biggest difference, in order.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
Mold can get started within 24 to 48 hours, so it's worth calling even if the worst seems over.
Typical build year
A lot of plumbing from these years has reached the end of its life. Galvanized steel narrows from the inside as it rusts, so weak water pressure can be a warning, not just an annoyance. Cast iron drains can crack, and fittings where old meets new are often the first thing to go.
Have a look under the kitchen and bathroom sinks and around the water heater. Any rust, drips or green staining is worth having a plumber check before it turns into a call to us.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Northeast
You get a bit of everything here: long freezes that burst pipes, ice dams that send water through ceilings, and big coastal storms. Rivers can rise fast when heavy rain falls on melting snow, or when a tropical system stalls overhead.
This is some of the oldest housing in the country. Stone and brick foundations let groundwater seep through, plaster walls and hardwood floors need slow drying, and radiators and steam systems add old pipework that can fail with little warning.
Dig down a little around here and you'll often hit rock. Water can't go through it, so it moves along it, and if your foundation's in the way, it comes in. A damp cellar after a rainy week is very often groundwater, not a leak.
In a cold house, water hangs around. It barely leaves chilled drywall, stone or hardwood on its own, so winter jobs often bring in controlled heat along with the dehumidifiers to get things moving again.
When you call
It starts with a few quick questions: your address, what happened and how long it's been wet. Then we'll connect you with someone from our network who works in Western Connecticut Planning Region. Your own home, a rental or a business, you'll know what's next before the call ends.
Before any equipment goes in, the specialist needs to know two things: how far the water got, and how dirty it is. Thermal cameras and moisture meters answer the first. For the second, there are three answers: Category 1, clean water, Category 2, dirty water, or Category 3, sewage and floodwater. With Category 3, plastic containment goes up and negative air machines with HEPA filters keep your house's air clean.
Drying is a process, and you'll have strange machines in the house for a few days. The bulk of the water goes first, by truck-mounted or portable extractor. Air movers then lift moisture off surfaces, and low grain refrigerant (LGR) dehumidifiers remove it from the air. A cold building or dense material may need desiccant units instead. Daily psychrometric readings show if the air is still pulling water out.
So how do you know it's done? It's done when the numbers say so. A dry baseline from untouched materials in your house is the target, and each wet area has to reach it before the equipment leaves. It follows the IICRC S500 standard, and you get a record of the readings for your insurance claim.
Most people expect to lose more than they do. Carpet that's only had clean water on it can usually be dried, though the pad underneath gets replaced. Drying mats can bring cupped hardwood back, given time. Walls often need only a flood cut, where the bottom of the drywall comes off and new board goes in.
If it was sewage or floodwater, porous things usually can't be saved. Carpet, pad and soaked insulation go in the dumpster, and studs and hard floors get cleaned and disinfected. Keep clear of any gas appliance that was underwater, and of any floor with a bit of bounce, until a professional has checked them.
From one end of Ball Pond to the other, and on through Western Connecticut Planning Region, the first step is the same call. Homes and businesses are both covered.
It depends on the time and the weather, but same-day help is what we aim for, and it's often a matter of hours. The local specialist will give you a time on the phone, so you're not left guessing.
Some of it, yes. A bit of clean water on tile is a job for a mop and a fan. It's different when water has got under the flooring or into a wall, or when it's dirty. Household fans can't dry a wall cavity, and sewage isn't safe to handle.
It depends on how much got wet and for how long. A fresh leak in one room could be dry in a couple of days, while a soaked floor and walls may need a week. You'll see daily readings, so you'll know how it's going.
Hardwood is more forgiving than people think. Floor drying mats pull moisture up through the boards, and refinishing can take care of what's left. Carpet can usually stay if the water was clean, as long as the pad's replaced. If the water was dirty, it can't.
Many water losses are covered, so it's worth checking. The usual line is sudden versus gradual: a burst supply line is generally covered, and a slow drip often isn't. Flood damage needs a separate flood policy, and a sewer backup may need an extra rider.
Call now. Tell us your address, and we'll find you the closest available specialist in Western Connecticut Planning Region.