Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
Whatever got wet in your Atomic City home, the next few hours matter more than the next few days. Call us and we'll find a restoration specialist from our network who works in Bingham County, Idaho, and can get dehumidifiers and extraction equipment to you soon.
Call Now: (888) 596-0163Someone picks up, day or night.
Atomic City gets less than 98% of the 30,291 places on our list. Low totals can fool you. Roofs and drains get little practice here, so problems tend to show up all at once in the one big storm.
If you've been meaning to clear the gutters, do it before May comes around.
Flood is the big one on this list, and a standard homeowners policy doesn't usually cover it. Not counted here: 4 more for things like fires or the pandemic.
Before anyone arrives
These are the steps that help most before anyone gets there. Do what you safely can.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
You've got about 24 to 48 hours to start drying before rot and mold become the bigger problem.
We couldn't find a reliable build year for this area, but the same few things cause most indoor leaks wherever you are: water heaters past 8 to 12 years, old washer hoses, ice maker lines, and the flexible connectors under toilets and sinks.
Take twenty minutes to look at each one, and make sure everyone at home knows where the main valve is. That one piece of knowledge can be the difference between a wet floor and a wet house.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Pacific Northwest
West of the Cascades, months of steady rain define the wet season, and atmospheric rivers can add days of heavy downpours and river flooding on top. East of the mountains, snow, ice and hard freezes bring burst pipes and ice dams instead. Either way, buildings can stay damp from fall to spring.
Crawlspaces are the standard foundation in many towns, and they stay damp through the rainy months. Wood siding, cedar shakes and heavy timber all take on water. Sill plates sitting just above the foundation are often the first bits of framing to rot.
By midwinter, the ground has taken all it can. In the lowlands, dense clay holds water near the surface, so crawlspaces can flood with no pipe problem at all. It's worth checking that your vapor barrier and any drains are doing their job.
Outside air won't help when it's this wet. Specialists seal off the area and run desiccant dehumidifiers, which keep working in cool, damp conditions where other machines slow down. It's especially useful in crawlspaces.
When you call
It starts with a few quick questions: your address, what happened and how long it's been wet. Then we'll connect you with someone from our network who works in Bingham County. Your own home, a rental or a business, you'll know what's next before the call ends.
Expect a walk through the house with a thermal camera and a moisture meter, because what you can see is usually only part of it. The specialist will also tell you which of the three categories you've got. Category 1 water is clean, Category 2 is dirty, and Category 3 is sewage or floodwater. That last one changes the job, with plastic containment around the work area and negative air machines pushing air through HEPA filters.
Getting the water out is the quick part. A truck-mounted or portable extractor handles that. After that, air movers sweep across wet surfaces, and low grain refrigerant (LGR) dehumidifiers take that moisture out of the room. In cold or dense spaces, desiccant dehumidifiers work better. You'll hear the machines day and night for a while, and daily psychrometric readings of the air show that they're working.
So how do you know it's done? It's done when the numbers say so. A dry baseline from untouched materials in your house is the target, and each wet area has to reach it before the equipment leaves. It follows the IICRC S500 standard, and you get a record of the readings for your insurance claim.
Most people expect to lose more than they do. Carpet that's only had clean water on it can usually be dried, though the pad underneath gets replaced. Drying mats can bring cupped hardwood back, given time. Walls often need only a flood cut, where the bottom of the drywall comes off and new board goes in.
Contaminated water is where the rules get strict. Sewage or floodwater means the carpet and pad come out, along with wet insulation, and what's left gets an antimicrobial treatment. It's also not safe to relight a gas appliance that's been underwater until someone's checked it, and a soft floor needs a look before anyone stands on it.
Our network covers Atomic City and the towns around it in Bingham County. That includes homes, rentals and businesses, day or night.
In most cases you'll have someone on the way that day. You can ask for a time when you're connected with the specialist. It may take longer after a storm, when much of Atomic City needs help at once.
A small spill of clean water on a hard floor? Sure. Towels and a fan will do it. But if the water's in the walls, the carpet pad or the subfloor, or it came from a sewer or a flood, you'll want it extracted and properly dried. What you can't see is what keeps causing damage.
Most homes take three to five days of drying once the water's out. Dense materials such as hardwood and plaster can take longer, and any rebuilding comes afterward.
Quite often. Floor mats and steady air can save hardwood that would otherwise be torn out, so tell the specialist about it first thing. With carpet, it all depends on the water: clean means dry it and replace the pad, sewage or floodwater means it comes out.
Often, but not always. Insurers tend to pay for sudden leaks and not for long-term seepage. Flooding from outside needs its own policy. Call your insurance company early, and keep the moisture logs and photos, since they make the claim much easier.
It's quick. Give us your address, and we'll connect you with a local specialist who can tell you when they'll be there.