Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
A leak at 2 a.m. doesn't wait for business hours, and neither do we. If water's getting into your home or business in Kaka, Arizona, call and we'll line up a nearby specialist who brings the extraction gear and dehumidifiers to deal with it properly.
Call Now: (888) 596-0163Someone picks up, day or night.
Storms top this list. High wind lifts shingles and flashing, and the next rain finds the gap. We've left out 14 for other causes, such as fire or the pandemic.
Before anyone arrives
You don't have to do all of this. Do what's safe, in this order, and leave the rest.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
The clock on mold is roughly 24 to 48 hours, which is why we'd rather hear from you early.
We couldn't find a reliable build year for this area, but the same few things cause most indoor leaks wherever you are: water heaters past 8 to 12 years, old washer hoses, ice maker lines, and the flexible connectors under toilets and sinks.
Take twenty minutes to look at each one, and make sure everyone at home knows where the main valve is. That one piece of knowledge can be the difference between a wet floor and a wet house.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The desert Southwest
The trouble with desert weather is how fast it changes. A dry afternoon can turn into a flash flood, and dry washes can fill with little warning. Roofs that have baked for months crack, so the first big storm of the season often finds the leak.
Homes here are built to keep heat out, and that can make water hard to spot. A stucco wall can look fine while the framing behind it stays wet. A failed condensate line from a rooftop unit can run for days. And water under tile doesn't show until the grout changes color.
Caliche and hard-packed soil don't let water through, so it moves across the surface until it hits something. Washes can run high well away from where the rain fell. Walls and doors on the uphill side of your lot are where you'll want to look.
A tile floor can look perfectly dry while the concrete underneath is soaked. Floor mat systems pull that water up through the grout, and injector systems get air inside the walls. It's slower than a fan, and it works.
When you call
Don't worry about having the right words. Just tell us what you're seeing. We'll get your address and a rough idea of the damage, then put you through to a specialist in our network who works around Kaka. They handle homes and commercial property, and they'll give you a time.
Before any equipment goes in, the specialist needs to know two things: how far the water got, and how dirty it is. Thermal cameras and moisture meters answer the first. For the second, there are three answers: Category 1, clean water, Category 2, dirty water, or Category 3, sewage and floodwater. With Category 3, plastic containment goes up and negative air machines with HEPA filters keep your house's air clean.
Most of the job is drying, and it's slower than people expect. Extraction units, often truck-mounted, take out the bulk water. Air movers and low grain refrigerant (LGR) dehumidifiers then do the long, loud work of pulling moisture out of walls and floors. Desiccant units come in when it's too cold or the materials are too dense for LGR machines. Psychrometric readings, which are daily checks of temperature and humidity, tell the specialist if the setup needs changing.
The finish line isn't when things look dry. Readings from dry wood and drywall in your own house set the target, called the dry standard, and the equipment stays until the wet areas reach it. That's the IICRC S500 standard for water damage at work, and those daily records are what your insurance company wants to see.
It depends mostly on how fast drying starts and how dirty the water was. With clean water, carpet can usually stay and the pad goes. Hardwood often comes back with drying mats and patience, and sanding can take care of what's left. Walls may only need a flood cut, which removes the bottom section of drywall, so the rest stays put.
Contaminated water is where the rules get strict. Sewage or floodwater means the carpet and pad come out, along with wet insulation, and what's left gets an antimicrobial treatment. It's also not safe to relight a gas appliance that's been underwater until someone's checked it, and a soft floor needs a look before anyone stands on it.
From one end of Kaka to the other, and on through Maricopa County, the first step is the same call. Homes and businesses are both covered.
It depends on the time and the weather, but same-day help is what we aim for, and it's often a matter of hours. The local specialist will give you a time on the phone, so you're not left guessing.
Some of it, yes. A bit of clean water on tile is a job for a mop and a fan. It's different when water has got under the flooring or into a wall, or when it's dirty. Household fans can't dry a wall cavity, and sewage isn't safe to handle.
It depends on how much got wet and for how long. A fresh leak in one room could be dry in a couple of days, while a soaked floor and walls may need a week. You'll see daily readings, so you'll know how it's going.
It depends on time and on the water. For hardwood, floor drying panels and patience can do a lot, though refinishing may still be needed. For carpet, clean water usually means new pad and the same carpet. Contaminated water means replacing both.
It usually depends on where the water came from. A homeowners policy usually covers a burst pipe. Outside flooding needs separate flood insurance, and sewer backup often needs an add-on. It's worth reading your policy, and it's worth having those photos.
Tell us what's happening, and we'll line up a specialist from our network in Maricopa County. That's all you need to do for now.