Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
Maybe a pipe let go, maybe the storm found a way in. Either way, you don't have to sort this out alone. Call us from Anegam, Arizona, and we'll put you in touch with a restoration specialist from our network, with truck-mounted extraction and dehumidifiers for the drying that follows.
Call Now: (888) 596-0163Someone picks up, day or night.
Homes around Anegam are newer than in 54% of the 28,807 places we track, which changes what tends to go wrong more than whether it does.
Severe storms lead the list here. They can open up a roof in minutes, and you may not see the leak for days. Not counted here: 7 more for things like fires or the pandemic.
Before anyone arrives
A few minutes now can save days of drying later. If something doesn't feel safe, skip it and tell us when you call.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
You've got about 24 to 48 hours to start drying before rot and mold become the bigger problem.
Typical build year
By now, most homes from this era have had some plumbing replaced, and the leftover sections are usually the risk. Look for gray galvanized pipe next to newer copper or plastic, because those joints can corrode. If you've had a few sewer backups, the old line itself may be the cause.
It's also worth replacing rubber washing machine hoses with braided steel. It's a ten-minute job, and those hoses cause a surprising number of flooded laundry rooms.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The desert Southwest
You can go months without thinking about rain, and then it all comes at once. Monsoon storms flood streets and yards in minutes and find every crack in an aging roof. Up in the higher country, a cold snap can freeze an exposed pipe just as easily as anywhere in the north.
Homes here are built to keep heat out, and that can make water hard to spot. A stucco wall can look fine while the framing behind it stays wet. A failed condensate line from a rooftop unit can run for days. And water under tile doesn't show until the grout changes color.
Baked ground acts more like a parking lot than a sponge. Rain runs off it fast, collects in low spots and pushes against anything in its way. If your yard slopes toward your home, or the patio has settled, you may find out in the first monsoon storm.
Desert air can dry a surface in hours and leave the slab below it wet. So the drying goes where the water is, with suction floor mat systems over tile and injectors feeding air into wall cavities.
When you call
Don't worry about having the right words. Just tell us what you're seeing. We'll get your address and a rough idea of the damage, then put you through to a specialist in our network who works around Anegam. They handle homes and commercial property, and they'll give you a time.
Water travels through walls without leaving a mark, so the first step is measuring, not mopping. A thermal camera and moisture meters map the wet area. Next comes the question of what's in the water. Category 1 is clean supply water. Category 2 has been in contact with something, like a dishwasher overflow. Category 3 is sewage or floodwater, and it calls for containment: plastic sheeting, plus negative air machines with HEPA filters, so nothing spreads through the house.
Drying is a process, and you'll have strange machines in the house for a few days. The bulk of the water goes first, by truck-mounted or portable extractor. Air movers then lift moisture off surfaces, and low grain refrigerant (LGR) dehumidifiers remove it from the air. A cold building or dense material may need desiccant units instead. Daily psychrometric readings show if the air is still pulling water out.
So how do you know it's done? It's done when the numbers say so. A dry baseline from untouched materials in your house is the target, and each wet area has to reach it before the equipment leaves. It follows the IICRC S500 standard, and you get a record of the readings for your insurance claim.
A lot of it can stay if you move quickly. If the water was clean, the carpet is often fine once the pad is replaced. Hardwood needs slow, careful drying with mats, and it may want refinishing at the end. Drywall is the easy one: a flood cut takes off the wet part, a little above the waterline, and the top of the wall is untouched.
If it was sewage or floodwater, porous things usually can't be saved. Carpet, pad and soaked insulation go in the dumpster, and studs and hard floors get cleaned and disinfected. Keep clear of any gas appliance that was underwater, and of any floor with a bit of bounce, until a professional has checked them.
From one end of Anegam to the other, and on through Pima County, the first step is the same call. Homes and businesses are both covered.
In most cases you'll have someone on the way that day. You can ask for a time when you're connected with the specialist. It may take longer after a storm, when much of Anegam needs help at once.
A small spill of clean water on a hard floor? Sure. Towels and a fan will do it. But if the water's in the walls, the carpet pad or the subfloor, or it came from a sewer or a flood, you'll want it extracted and properly dried. What you can't see is what keeps causing damage.
Most homes take three to five days of drying once the water's out. Dense materials such as hardwood and plaster can take longer, and any rebuilding comes afterward.
It depends on time and on the water. For hardwood, floor drying panels and patience can do a lot, though refinishing may still be needed. For carpet, clean water usually means new pad and the same carpet. Contaminated water means replacing both.
It usually depends on where the water came from. A homeowners policy usually covers a burst pipe. Outside flooding needs separate flood insurance, and sewer backup often needs an add-on. It's worth reading your policy, and it's worth having those photos.
Tell us what's happening, and we'll line up a specialist from our network in Pima County. That's all you need to do for now.