Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
Water where it shouldn't be gets stressful fast, and it keeps spreading while you work out what to do. If it's a burst pipe, a soaked ceiling or storm water at the door in Tukwila, Washington, call us. We'll get a specialist from our network of local restoration companies moving toward you, with extraction equipment and dehumidifiers.
Call Now: (888) 596-0163Someone picks up, day or night.
Housing here is newer than in 62% of the 28,807 places on our list. So you're less likely to have old pipes, and more likely to have plastic lines and fittings that are starting to age.
That's drier than 57% of the 30,291 places we track. Less rain doesn't mean less risk indoors. Most damage here starts with plumbing, and when a big storm does come, dry ground doesn't soak it up.
If you've been meaning to clear the gutters, do it before November comes around.
Flooding leads the list here. Floodwater is never clean, so anything it touches needs more than drying. We've left out 20 for other causes, such as fire or the pandemic.
Before anyone arrives
Go through these in order and skip anything that doesn't feel safe. None of it is worth getting hurt over.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
Mold can get started within 24 to 48 hours, so it's worth calling even if the worst seems over.
Typical build year
Homes from these decades often still have their first galvanized pipes, or a mix of galvanized and newer copper. Where those two metals meet is a common place for a leak to start. Some homes from the middle of this period also have sewer lines made of a tar-paper pipe called Orangeburg, which sags and collapses with age.
Look where pipes join around the water heater and under sinks, and check for rust or green crust. Slow drains in several rooms are worth a sewer camera, and that's a lot cheaper than a backup.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Pacific Northwest
It's less about one big storm than about months of wet. West of the mountains, roofs and walls hardly get the chance to dry between October and April, and an atmospheric river can flood rivers on top of that. On the dry side, your bigger worry is frozen pipes and ice dams.
Lots of wood and lots of rain make a tricky pair. Framing that gets wet here may not dry out by itself until summer. Sill plates and rim joists sit right where water collects, so that's where a specialist will usually look first.
Soil stays saturated for much of the wet season, and glacial clay in many lowland areas barely drains at all. Water collects in crawlspaces and against foundations, and it can stay there for weeks after the rain lets up.
Cool, wet air is hard to dry. That's where desiccant units come in, since they keep pulling water at low temperatures. Set up inside sealed containment, they can get a crawlspace and subfloor dry even in the middle of the rainy season.
When you call
We'll ask where you are, what happened and whether the water's still running. That takes a couple of minutes. Then we'll connect you with a specialist from our network who works in King County, and you can ask them when they can be there before you hang up. Homes and commercial buildings are both fine.
Expect a walk through the house with a thermal camera and a moisture meter, because what you can see is usually only part of it. The specialist will also tell you which of the three categories you've got. Category 1 water is clean, Category 2 is dirty, and Category 3 is sewage or floodwater. That last one changes the job, with plastic containment around the work area and negative air machines pushing air through HEPA filters.
Most of the job is drying, and it's slower than people expect. Extraction units, often truck-mounted, take out the bulk water. Air movers and low grain refrigerant (LGR) dehumidifiers then do the long, loud work of pulling moisture out of walls and floors. Desiccant units come in when it's too cold or the materials are too dense for LGR machines. Psychrometric readings, which are daily checks of temperature and humidity, tell the specialist if the setup needs changing.
The finish line isn't when things look dry. Readings from dry wood and drywall in your own house set the target, called the dry standard, and the equipment stays until the wet areas reach it. That's the IICRC S500 standard for water damage at work, and those daily records are what your insurance company wants to see.
More than you'd think, if it's caught early. Carpet soaked with clean water can often be dried in place once the pad's been pulled. Hardwood is worth trying to save too, with floor drying mats and slow drying, though it may need refinishing. Drywall that's wet only at the base can be cut a little above the waterline instead of being replaced to the ceiling, which is what a flood cut is.
If it was sewage or floodwater, porous things usually can't be saved. Carpet, pad and soaked insulation go in the dumpster, and studs and hard floors get cleaned and disinfected. Keep clear of any gas appliance that was underwater, and of any floor with a bit of bounce, until a professional has checked them.
From one end of Tukwila to the other, and on through King County, the first step is the same call. Homes and businesses are both covered.
We aim to have a specialist on the way the same day, often within hours. When a big storm hits all of King County at once, it can take longer, so it pays to call early. The steps above will help while you wait.
Small and clean, yes. Large or dirty, no. A shop vac and fans can deal with a little water on a hard surface, but they won't reach what's soaked into drywall and subfloor. That hidden moisture is where mold and rot get started.
A small leak that's caught early may dry in two or three days. A flooded room with wet subfloor and insulation can take a week or more, and repairs start after that.
Hardwood is more forgiving than people think. Floor drying mats pull moisture up through the boards, and refinishing can take care of what's left. Carpet can usually stay if the water was clean, as long as the pad's replaced. If the water was dirty, it can't.
It usually depends on where the water came from. A homeowners policy usually covers a burst pipe. Outside flooding needs separate flood insurance, and sewer backup often needs an add-on. It's worth reading your policy, and it's worth having those photos.
Call now. Tell us your address, and we'll find you the closest available specialist in King County.