We Restore Water Damage (888) 596-0163
Menu
Call Now: (888) 596-0163

Water in the house? Call now, and we'll find you a local specialist.

Water Damage Restoration in Silverdale, WA

Maybe a pipe let go, maybe the storm found a way in. Either way, you don't have to sort this out alone. Call us from Silverdale, Washington, and we'll put you in touch with a restoration specialist from our network, with truck-mounted extraction and dehumidifiers for the drying that follows.

Call Now: (888) 596-0163

Someone picks up, day or night.

Gutted room with metal stud framing and new drywall sheets during water damage repairs

What we know about water in Silverdale

Kitsap County, Washington. Public records, linked in each box.
Source: ACS 2023 5-year, table B25035
1992
Half the homes around Silverdale were built before this year

Housing here is newer than in 86% of the 28,807 places on our list. So you're less likely to have old pipes, and more likely to have plastic lines and fittings that are starting to age.

Source: NOAA 1991-2020 Climate Normals, station USC00450872
56.9 in
Rain and melted snow, in inches, in a typical year

92% of the 30,291 places we track come out drier. A normal year here brings enough water to find any weak spot in a roof or along a foundation wall.

Source: NOAA 1991-2020 Climate Normals, station USC00450872
DEC
Most precipitation of the year comes in December

If you've been meaning to clear the gutters, do it before December comes around.

Source: OpenFEMA Disaster Declarations Summaries v2, 2016-01-01 to 2026-10-31
7
Weather or water disasters out of 26 federal declarations for Kitsap County since 2016
  • Flood5
  • Severe Storm2

Flooding leads the list here. Floodwater is never clean, so anything it touches needs more than drying. That leaves out 19 for causes such as fire or the pandemic.

Before anyone arrives

What to do right now in Silverdale

Go through these in order and skip anything that doesn't feel safe. None of it is worth getting hurt over.

  1. Shut off the water

    Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.

  2. Stay clear of the power

    If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.

  3. Take pictures first

    Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.

  4. Rescue what you can

    Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.

  5. Let the air move

    If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.

Call Now: (888) 596-0163

Mold can get started within 24 to 48 hours, so it's worth calling even if the worst seems over.

Typical build year

The usual weak spots in Silverdale homes

If your house dates from the late 1970s to the mid 1990s, take a look at the pipes. Polybutylene went into a lot of homes in those years. It's gray plastic, and it has a habit of failing with no warning. You can often spot it at the water heater or under a sink.

Then there's the water heater itself. Most tanks last 8 to 12 years, so a house this age is probably on its second or third, and yours may be getting close. If you see polybutylene, it's worth asking a plumber about it, even if nothing's leaking yet.

Call Now: (888) 596-0163
Gloved hands fitting a threaded pipe to a radiator

From first call to final repair in Silverdale

The Pacific Northwest

Why water behaves differently in Silverdale

Weather

West of the Cascades, months of steady rain define the wet season, and atmospheric rivers can add days of heavy downpours and river flooding on top. East of the mountains, snow, ice and hard freezes bring burst pipes and ice dams instead. Either way, buildings can stay damp from fall to spring.

Buildings

Have a look in your crawlspace at the end of the wet season. That's where a slow leak or poor drainage shows up, and damp air there can reach the floor above. Wood siding and cedar roofs look great, but they do need upkeep to keep the water out.

Ground

Soil stays saturated for much of the wet season, and glacial clay in many lowland areas barely drains at all. Water collects in crawlspaces and against foundations, and it can stay there for weeks after the rain lets up.

Drying

With steady rain and humidity near 100 percent, a building can't dry on its own. Commercial desiccant dehumidifiers run inside sealed containment to pull moisture out of soaked sill plates and subfloors.

When you call

What happens after you call us from Silverdale

We'll ask where you are, what happened and whether the water's still running. That takes a couple of minutes. Then we'll connect you with a specialist from our network who works in Kitsap County, and you can ask them when they can be there before you hang up. Homes and commercial buildings are both fine.

When the specialist arrives, the first job is finding where the water went, because that's rarely where it's pooled. Thermal cameras and moisture meters show how far it has traveled behind walls. They'll also work out what kind of water it is. Category 1 is clean water from a supply line, Category 2 is dirty, like a washer overflow, and Category 3 is sewage or floodwater. Category 3 means sealing the area with plastic, called containment, and running negative air machines with HEPA filters to keep the dirty air away from the rest of your home.

Expect the drying to take longer than the cleanup. After a truck-mounted or portable unit has pulled out the standing water, air movers and LGR (low grain refrigerant) dehumidifiers run around the clock. Desiccant units get swapped in for cold rooms and dense materials. The specialist takes psychrometric readings each day, tracking temperature and humidity to see how fast the air is taking up water.

A wall can feel dry and still hold plenty of water. That's why the specialist measures a dry standard from unaffected wood and drywall nearby and keeps the equipment running until the wet areas match. This is the method in the IICRC S500 standard, and those moisture logs back up your insurance claim.

Call Now: (888) 596-0163

What can be saved in a Silverdale home

A lot of it can stay if you move quickly. If the water was clean, the carpet is often fine once the pad is replaced. Hardwood needs slow, careful drying with mats, and it may want refinishing at the end. Drywall is the easy one: a flood cut takes off the wet part, a little above the waterline, and the top of the wall is untouched.

Things change when the water's dirty. Anything soft that sewage or floodwater reached, such as carpet, pad and insulation, gets thrown out. Hard surfaces get cleaned and treated. Have a professional look at any gas appliance that got wet before you turn it back on, and don't walk on a floor that's gone spongy.

Water damage help across Silverdale

From one end of Silverdale to the other, and on through Kitsap County, the first step is the same call. Homes and businesses are both covered.

ZIP codes in Silverdale

  • 98311
  • 98383
  • 98370

More water damage help in Washington

Your Silverdale water damage questions answered

How fast can someone get to me in Silverdale?

Usually the same day, and often within a few hours. It depends on who's closest and how busy Kitsap County is. If a storm has just gone through, everyone's calling at once, so call as soon as you can.

Can I clean up water damage myself?

You can handle a minor spill if it's clean water and it hasn't gone anywhere. For anything that's reached the carpet pad, the walls or the floor below, professional drying really does make a difference, and floodwater or sewage should be left to people with the right protective gear.

How long does it take to dry out a house?

Usually three to five days for the drying alone. The specialist can tell you more after the first readings. Materials such as hardwood, plaster and concrete hold on to water longer, and repairs can only begin when they're dry.

Can wet hardwood floors and carpet be saved?

It depends on time and on the water. For hardwood, floor drying panels and patience can do a lot, though refinishing may still be needed. For carpet, clean water usually means new pad and the same carpet. Contaminated water means replacing both.

Will my insurance pay for water damage?

Sudden and accidental damage, such as a pipe that bursts, is usually covered. Slow leaks and rising floodwater usually aren't, unless you've got flood insurance. Take pictures before cleaning up and keep every receipt, because your insurance company will ask.

Water in your Silverdale home?

(888) 596-0163

Day or night, someone picks up. We'll connect you with a specialist who works in Kitsap County.

Call Now: (888) 596-0163