Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
You've found water and you're not sure how bad it is. That's normal, and it's why you can just call. Tell us what's going on in Selah, Washington, and we'll connect you with a local restoration specialist who can bring pumps, truck-mounted extraction and dehumidifiers to your door.
Call Now: (888) 596-0163Someone picks up, day or night.
That's newer than 77% of the 28,807 US places we track. Newer doesn't mean leak-proof, though. It only changes what's likely to fail.
Selah gets less than 98% of the 30,291 places on our list. Less rain doesn't mean less risk indoors. Most damage here starts with plumbing, and when a big storm does come, dry ground doesn't soak it up.
Check your drains and the slope around the house ahead of December. It takes an afternoon, and it can save a lot of drying later.
Floods top this list, and flood damage needs its own kind of cleanup, because of what the water carries in. Not counted here: 23 more for things like fires or the pandemic.
Before anyone arrives
These are the steps that help most before anyone gets there. Do what you safely can.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
The clock on mold is roughly 24 to 48 hours, which is why we'd rather hear from you early.
Typical build year
If your house dates from the late 1970s to the mid 1990s, take a look at the pipes. Polybutylene went into a lot of homes in those years. It's gray plastic, and it has a habit of failing with no warning. You can often spot it at the water heater or under a sink.
Then there's the water heater itself. Most tanks last 8 to 12 years, so a house this age is probably on its second or third, and yours may be getting close. If you see polybutylene, it's worth asking a plumber about it, even if nothing's leaking yet.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Pacific Northwest
The rain here wears things down slowly. A small gap in the siding or a tired roof can let in a little water all winter long, and you may not notice until spring. To the east, the risk looks different, with hard freezes and ice taking most of the blame.
Lots of wood and lots of rain make a tricky pair. Framing that gets wet here may not dry out by itself until summer. Sill plates and rim joists sit right where water collects, so that's where a specialist will usually look first.
Wet ground is the normal condition here for months at a time. Heavy clay doesn't let it through, so groundwater can stand under a house long after a storm. On a hillside, all that water is also working its way downhill toward your foundation.
With steady rain and humidity near 100 percent, a building can't dry on its own. Commercial desiccant dehumidifiers run inside sealed containment to pull moisture out of soaked sill plates and subfloors.
When you call
First we'll want to know three things: where you are in Selah, where the water came from and if it's stopped. From there, we'll connect you with a local specialist from our network, so you're speaking to someone who works in Yakima County. That goes for homeowners, landlords and businesses alike.
Water travels through walls without leaving a mark, so the first step is measuring, not mopping. A thermal camera and moisture meters map the wet area. Next comes the question of what's in the water. Category 1 is clean supply water. Category 2 has been in contact with something, like a dishwasher overflow. Category 3 is sewage or floodwater, and it calls for containment: plastic sheeting, plus negative air machines with HEPA filters, so nothing spreads through the house.
Drying is a process, and you'll have strange machines in the house for a few days. The bulk of the water goes first, by truck-mounted or portable extractor. Air movers then lift moisture off surfaces, and low grain refrigerant (LGR) dehumidifiers remove it from the air. A cold building or dense material may need desiccant units instead. Daily psychrometric readings show if the air is still pulling water out.
Nobody should take the machines away just because a wall feels dry. The target is the dry standard, measured from sound materials in your own home, and the job follows the IICRC S500 standard until the readings match. Ask for a copy of the daily log. Your insurer will want it.
Don't write everything off just because it's wet. Clean-water carpet can usually be dried where it sits, with new pad underneath. Hardwood floors respond well to floor drying mats if you get to them early, though you may see some cupping for a while. And drywall usually needs a flood cut near the floor, not a whole new wall.
Sewage and floodwater are a different story. Carpet they've touched has to go, and what stays gets cleaned and treated with an antimicrobial. Two more things to check before you use the room again: a gas appliance that sat in water, and any floor that feels soft underfoot.
Calls come to us from homeowners, landlords and business owners across Selah and Yakima County. Give us your address, and we'll find out who's closest.
In most cases you'll have someone on the way that day. You can ask for a time when you're connected with the specialist. It may take longer after a storm, when much of Selah needs help at once.
Some of it, yes. A bit of clean water on tile is a job for a mop and a fan. It's different when water has got under the flooring or into a wall, or when it's dirty. Household fans can't dry a wall cavity, and sewage isn't safe to handle.
It depends on how much got wet and for how long. A fresh leak in one room could be dry in a couple of days, while a soaked floor and walls may need a week. You'll see daily readings, so you'll know how it's going.
Quite often. Floor mats and steady air can save hardwood that would otherwise be torn out, so tell the specialist about it first thing. With carpet, it all depends on the water: clean means dry it and replace the pad, sewage or floodwater means it comes out.
Often, but not always. Insurers tend to pay for sudden leaks and not for long-term seepage. Flooding from outside needs its own policy. Call your insurance company early, and keep the moisture logs and photos, since they make the claim much easier.
Tell us what's happening, and we'll line up a specialist from our network in Yakima County. That's all you need to do for now.