Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water Damage Restoration in Seattle, WA
You've found water and you're not sure how bad it is. That's normal, and it's why you can just call. Tell us what's going on in Seattle, Washington, and we'll connect you with a local restoration specialist who can bring pumps, truck-mounted extraction and dehumidifiers to your door.
Call Now: (888) 596-0163Someone picks up, day or night.
Seattle's water file
King County, Washington. Public records, linked in each box.- Source: ACS 2023 5-year, table B25035
- 1974The middle year for homes around Seattle. Half are older
Housing here is newer than in 51% of the 28,807 places on our list. So you're less likely to have old pipes, and more likely to have plastic lines and fittings that are starting to age.
- Source: NOAA 1991-2020 Climate Normals, station USW00094290
- 37.8 inRain and melted snow, in inches, in a typical year
That's drier than 62% of the 30,291 places we track. Less rain doesn't mean less risk indoors. Most damage here starts with plumbing, and when a big storm does come, dry ground doesn't soak it up.
- Source: NOAA 1991-2020 Climate Normals, station USW00094290
- NOVOn average, the most rain and snow falls in November
Check your drains and the slope around the house ahead of November. It takes an afternoon, and it can save a lot of drying later.
- Source: OpenFEMA Disaster Declarations Summaries v2, 2016-01-01 to 2026-10-31
- 9Weather or water disasters out of 29 federal declarations for King County since 2016
- Flood7
- Severe Storm2
Floods top this list, and flood damage needs its own kind of cleanup, because of what the water carries in. Not counted here: 20 more for things like fires or the pandemic.
Before anyone arrives
First steps for a Seattle water emergency
No need to get it perfect. These are the things that make the biggest difference, in order.
Shut off the water
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
Stay clear of the power
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Take pictures first
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Rescue what you can
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
Let the air move
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
Call Now: (888) 596-0163
You've got about 24 to 48 hours to start drying before rot and mold become the bigger problem.
Typical build year
Where to look first in a Seattle home of this age
A lot of plumbing from these years has reached the end of its life. Galvanized steel narrows from the inside as it rusts, so weak water pressure can be a warning, not just an annoyance. Cast iron drains can crack, and fittings where old meets new are often the first thing to go.
Have a look under the kitchen and bathroom sinks and around the water heater. Any rust, drips or green staining is worth having a plumber check before it turns into a call to us.
Call Now: (888) 596-0163
How we can help in Seattle
Water Damage Cleanup & Extraction
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Flood Damage Restoration
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
Basement Water Damage Restoration
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Structural Drying and Dehumidification
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Water Damage Repair and Restoration
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Pacific Northwest
Why water behaves differently in Seattle
Weather
West of the Cascades, months of steady rain define the wet season, and atmospheric rivers can add days of heavy downpours and river flooding on top. East of the mountains, snow, ice and hard freezes bring burst pipes and ice dams instead. Either way, buildings can stay damp from fall to spring.
Buildings
Crawlspaces are the standard foundation in many towns, and they stay damp through the rainy months. Wood siding, cedar shakes and heavy timber all take on water. Sill plates sitting just above the foundation are often the first bits of framing to rot.
Ground
By midwinter, the ground has taken all it can. In the lowlands, dense clay holds water near the surface, so crawlspaces can flood with no pipe problem at all. It's worth checking that your vapor barrier and any drains are doing their job.
Drying
Outside air won't help when it's this wet. Specialists seal off the area and run desiccant dehumidifiers, which keep working in cool, damp conditions where other machines slow down. It's especially useful in crawlspaces.
When you call
How a water damage job works in Seattle
The call itself is short. Tell us your address in Seattle, what got wet and if it's still coming in. We'll connect you with a restoration specialist from our network who covers King County, and they'll tell you what they can do and when. It doesn't matter if it's a house, a rental or a business.
When the specialist arrives, the first job is finding where the water went, because that's rarely where it's pooled. Thermal cameras and moisture meters show how far it has traveled behind walls. They'll also work out what kind of water it is. Category 1 is clean water from a supply line, Category 2 is dirty, like a washer overflow, and Category 3 is sewage or floodwater. Category 3 means sealing the area with plastic, called containment, and running negative air machines with HEPA filters to keep the dirty air away from the rest of your home.
Most of the job is drying, and it's slower than people expect. Extraction units, often truck-mounted, take out the bulk water. Air movers and low grain refrigerant (LGR) dehumidifiers then do the long, loud work of pulling moisture out of walls and floors. Desiccant units come in when it's too cold or the materials are too dense for LGR machines. Psychrometric readings, which are daily checks of temperature and humidity, tell the specialist if the setup needs changing.
A wall can feel dry and still hold plenty of water. That's why the specialist measures a dry standard from unaffected wood and drywall nearby and keeps the equipment running until the wet areas match. This is the method in the IICRC S500 standard, and those moisture logs back up your insurance claim.
What can usually be saved in a Seattle home
Don't write everything off just because it's wet. Clean-water carpet can usually be dried where it sits, with new pad underneath. Hardwood floors respond well to floor drying mats if you get to them early, though you may see some cupping for a while. And drywall usually needs a flood cut near the floor, not a whole new wall.
Things change when the water's dirty. Anything soft that sewage or floodwater reached, such as carpet, pad and insulation, gets thrown out. Hard surfaces get cleaned and treated. Have a professional look at any gas appliance that got wet before you turn it back on, and don't walk on a floor that's gone spongy.
Our Seattle service area
We take calls from all over Seattle and the rest of King County, for houses, apartments and commercial buildings. If you're not sure you're close enough, just ask.
ZIP codes in Seattle
- 98109
- 98108
- 98105
- 98104
- 98107
- 98106
- 98101
- 98103
- 98102
- 98154
Your Seattle water damage questions answered
How fast can someone get to me in Seattle?
We aim to have a specialist on the way the same day, often within hours. When a big storm hits all of King County at once, it can take longer, so it pays to call early. The steps above will help while you wait.
Can I clean up water damage myself?
If it's small, clean and caught quickly, go ahead. If it has been sitting, has gone under the floor or smells bad, that's the time to call. The trouble with doing it yourself is that everything can look dry on top and still be wet underneath.
How long does it take to dry out a house?
Plan on several days. Three to five is typical, though a small, fresh leak may be quicker and a large flood may take over a week. The readings decide when it's done, not the calendar.
Can wet hardwood floors and carpet be saved?
Usually, with clean water and a fast start. Drying mats sit on hardwood and draw the moisture out slowly so the boards don't split. Sanding and refinishing can fix any cupping that's left. Carpet needs a new pad, and it can't be saved at all after sewage or floodwater.
Will my insurance pay for water damage?
Sudden and accidental damage, such as a pipe that bursts, is usually covered. Slow leaks and rising floodwater usually aren't, unless you've got flood insurance. Take pictures before cleaning up and keep every receipt, because your insurance company will ask.
Need help with water in Seattle?
(888) 596-0163Call now. Tell us your address, and we'll find you the closest available specialist in King County.