Water Damage Restoration in Pullman, WA

A leak at 2 a.m. doesn't wait for business hours, and neither do we. If water's getting into your home or business in Pullman, Washington, call and we'll line up a nearby specialist who brings the extraction gear and dehumidifiers to deal with it properly.

Call Now: (888) 596-0163

Someone picks up, day or night.

Gutted room with metal stud framing and new drywall sheets during water damage repairs

Water in Pullman by the numbers

Whitman County, Washington. Public records, linked in each box.
Source: ACS 2023 5-year, table B25035
1986
The middle year for homes around Pullman. Half are older

That's newer than 77% of the 28,807 US places we track. Newer doesn't mean leak-proof, though. It only changes what's likely to fail.

Source: NOAA 1991-2020 Climate Normals, station USC00456789
20.4 in
Rain and melted snow, in inches, in a typical year

Pullman gets less than 86% of the 30,291 places on our list. Less rain doesn't mean less risk indoors. Most damage here starts with plumbing, and when a big storm does come, dry ground doesn't soak it up.

Source: NOAA 1991-2020 Climate Normals, station USC00456789
DEC
Most precipitation of the year comes in December

A look at the roof, gutters and downspouts before December is the cheapest repair you'll ever make.

Source: OpenFEMA Disaster Declarations Summaries v2, 2016-01-01 to 2026-10-31
8
Of 29 federal disaster declarations for Whitman County since 2016, this many were weather or water
  • Flood5
  • Severe Storm3

Flooding leads the list here. Floodwater is never clean, so anything it touches needs more than drying. Not counted here: 21 more for things like fires or the pandemic.

Before anyone arrives

What to do first if you're in Pullman

No need to get it perfect. These are the things that make the biggest difference, in order.

  1. Shut off the water

    Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.

  2. Stay clear of the power

    If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.

  3. Take pictures first

    Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.

  4. Rescue what you can

    Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.

  5. Let the air move

    If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.

Call Now: (888) 596-0163

Mold can get started within 24 to 48 hours, so it's worth calling even if the worst seems over.

Typical build year

What to check around Pullman before it leaks

Homes from these years often had plastic plumbing put in, and one type stands out. Polybutylene, usually gray and often stamped PB, was widely used until the mid 1990s and is known for failing without warning, usually at the fittings.

Check the exposed lines near your water heater and under the sinks. While you're there, look at the tank's age on its label. Eight to twelve years is about all you can expect, and when one fails, it fails on the floor.

Call Now: (888) 596-0163
Gloved hands fitting a threaded pipe to a radiator

Help for every kind of water problem in Pullman

The Pacific Northwest

How long wet seasons shape water damage in Pullman

Weather

It's less about one big storm than about months of wet. West of the mountains, roofs and walls hardly get the chance to dry between October and April, and an atmospheric river can flood rivers on top of that. On the dry side, your bigger worry is frozen pipes and ice dams.

Buildings

Crawlspaces are the standard foundation in many towns, and they stay damp through the rainy months. Wood siding, cedar shakes and heavy timber all take on water. Sill plates sitting just above the foundation are often the first bits of framing to rot.

Ground

By midwinter, the ground has taken all it can. In the lowlands, dense clay holds water near the surface, so crawlspaces can flood with no pipe problem at all. It's worth checking that your vapor barrier and any drains are doing their job.

Drying

Outside air won't help when it's this wet. Specialists seal off the area and run desiccant dehumidifiers, which keep working in cool, damp conditions where other machines slow down. It's especially useful in crawlspaces.

When you call

What to expect once you've called from Pullman

Don't worry about having the right words. Just tell us what you're seeing. We'll get your address and a rough idea of the damage, then put you through to a specialist in our network who works around Pullman. They handle homes and commercial property, and they'll give you a time.

Water travels through walls without leaving a mark, so the first step is measuring, not mopping. A thermal camera and moisture meters map the wet area. Next comes the question of what's in the water. Category 1 is clean supply water. Category 2 has been in contact with something, like a dishwasher overflow. Category 3 is sewage or floodwater, and it calls for containment: plastic sheeting, plus negative air machines with HEPA filters, so nothing spreads through the house.

Expect the drying to take longer than the cleanup. After a truck-mounted or portable unit has pulled out the standing water, air movers and LGR (low grain refrigerant) dehumidifiers run around the clock. Desiccant units get swapped in for cold rooms and dense materials. The specialist takes psychrometric readings each day, tracking temperature and humidity to see how fast the air is taking up water.

So how do you know it's done? It's done when the numbers say so. A dry baseline from untouched materials in your house is the target, and each wet area has to reach it before the equipment leaves. It follows the IICRC S500 standard, and you get a record of the readings for your insurance claim.

Call Now: (888) 596-0163

What you can save and what has to go in Pullman

A lot of it can stay if you move quickly. If the water was clean, the carpet is often fine once the pad is replaced. Hardwood needs slow, careful drying with mats, and it may want refinishing at the end. Drywall is the easy one: a flood cut takes off the wet part, a little above the waterline, and the top of the wall is untouched.

If it was sewage or floodwater, porous things usually can't be saved. Carpet, pad and soaked insulation go in the dumpster, and studs and hard floors get cleaned and disinfected. Keep clear of any gas appliance that was underwater, and of any floor with a bit of bounce, until a professional has checked them.

Water damage help across Pullman

Our network covers Pullman and the towns around it in Whitman County. That includes homes, rentals and businesses, day or night.

ZIP codes in Pullman

  • 99163
  • 99164

Other Washington service areas

What people in Pullman ask us

How fast can someone get to me in Pullman?

We aim to have a specialist on the way the same day, often within hours. When a big storm hits all of Whitman County at once, it can take longer, so it pays to call early. The steps above will help while you wait.

Can I clean up water damage myself?

Small and clean, yes. Large or dirty, no. A shop vac and fans can deal with a little water on a hard surface, but they won't reach what's soaked into drywall and subfloor. That hidden moisture is where mold and rot get started.

How long does it take to dry out a house?

It depends on how much got wet and for how long. A fresh leak in one room could be dry in a couple of days, while a soaked floor and walls may need a week. You'll see daily readings, so you'll know how it's going.

Can wet hardwood floors and carpet be saved?

It depends on time and on the water. For hardwood, floor drying panels and patience can do a lot, though refinishing may still be needed. For carpet, clean water usually means new pad and the same carpet. Contaminated water means replacing both.

Will my insurance pay for water damage?

That's between you and your insurance company, but most policies cover sudden water damage from inside the home. Flood is separate, and sewer backup is often an add-on. Your best help is good records: photos from the start, plus the daily drying readings.

Water in your Pullman home?

(888) 596-0163

The sooner drying starts, the less has to come out. One call gets a local specialist moving toward you.

Call Now: (888) 596-0163