Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
Water where it shouldn't be gets stressful fast, and it keeps spreading while you work out what to do. If it's a burst pipe, a soaked ceiling or storm water at the door in Maple Valley, Washington, call us. We'll get a specialist from our network of local restoration companies moving toward you, with extraction equipment and dehumidifiers.
Call Now: (888) 596-0163Someone picks up, day or night.
Homes around Maple Valley are newer than in 94% of the 28,807 places we track, which changes what tends to go wrong more than whether it does.
Maple Valley gets more than 95% of the 30,291 places on our list. That's plenty of water to find a tired roof, a blocked downspout or a low spot by the foundation.
Check your drains and the slope around the house ahead of November. It takes an afternoon, and it can save a lot of drying later.
Floods top this list, and flood damage needs its own kind of cleanup, because of what the water carries in. That leaves out 20 for causes such as fire or the pandemic.
Before anyone arrives
Go through these in order and skip anything that doesn't feel safe. None of it is worth getting hurt over.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
Mold can get started within 24 to 48 hours, so it's worth calling even if the worst seems over.
Typical build year
Most leaks in a newer house don't start in the walls. They start at the things connected to them: the water heater, the washing machine hoses, the fridge's ice maker line and the flexible connectors under sinks and toilets.
Have a look at each one once a year and replace anything bulging, rusty or kinked. Many water heaters from the early building boom are now reaching the 8 to 12 year point where they tend to fail, so check the date on yours.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Pacific Northwest
The rain here wears things down slowly. A small gap in the siding or a tired roof can let in a little water all winter long, and you may not notice until spring. To the east, the risk looks different, with hard freezes and ice taking most of the blame.
Crawlspaces are the standard foundation in many towns, and they stay damp through the rainy months. Wood siding, cedar shakes and heavy timber all take on water. Sill plates sitting just above the foundation are often the first bits of framing to rot.
By midwinter, the ground has taken all it can. In the lowlands, dense clay holds water near the surface, so crawlspaces can flood with no pipe problem at all. It's worth checking that your vapor barrier and any drains are doing their job.
Outside air won't help when it's this wet. Specialists seal off the area and run desiccant dehumidifiers, which keep working in cool, damp conditions where other machines slow down. It's especially useful in crawlspaces.
When you call
The call itself is short. Tell us your address in Maple Valley, what got wet and if it's still coming in. We'll connect you with a restoration specialist from our network who covers King County, and they'll tell you what they can do and when. It doesn't matter if it's a house, a rental or a business.
The first hour is mostly detective work. Using thermal imaging and moisture meters, the specialist traces the water through walls and floors. Then they'll sort it into Category 1, 2 or 3, from clean supply line water to sewage or floodwater. If it's Category 3, they'll seal the area with plastic sheeting and set up negative air with HEPA filtration, so the contaminated air stays put.
Drying is a process, and you'll have strange machines in the house for a few days. The bulk of the water goes first, by truck-mounted or portable extractor. Air movers then lift moisture off surfaces, and low grain refrigerant (LGR) dehumidifiers remove it from the air. A cold building or dense material may need desiccant units instead. Daily psychrometric readings show if the air is still pulling water out.
The finish line isn't when things look dry. Readings from dry wood and drywall in your own house set the target, called the dry standard, and the equipment stays until the wet areas reach it. That's the IICRC S500 standard for water damage at work, and those daily records are what your insurance company wants to see.
More than you'd think, if it's caught early. Carpet soaked with clean water can often be dried in place once the pad's been pulled. Hardwood is worth trying to save too, with floor drying mats and slow drying, though it may need refinishing. Drywall that's wet only at the base can be cut a little above the waterline instead of being replaced to the ceiling, which is what a flood cut is.
If it was sewage or floodwater, porous things usually can't be saved. Carpet, pad and soaked insulation go in the dumpster, and studs and hard floors get cleaned and disinfected. Keep clear of any gas appliance that was underwater, and of any floor with a bit of bounce, until a professional has checked them.
From one end of Maple Valley to the other, and on through King County, the first step is the same call. Homes and businesses are both covered.
Often within hours. Our network covers King County, and we'll look for whoever can reach you soonest. Storms are the exception, because every crew in the area gets busy, so please don't wait to see if it gets worse.
A small spill of clean water on a hard floor? Sure. Towels and a fan will do it. But if the water's in the walls, the carpet pad or the subfloor, or it came from a sewer or a flood, you'll want it extracted and properly dried. What you can't see is what keeps causing damage.
Usually three to five days for the drying alone. The specialist can tell you more after the first readings. Materials such as hardwood, plaster and concrete hold on to water longer, and repairs can only begin when they're dry.
It depends on time and on the water. For hardwood, floor drying panels and patience can do a lot, though refinishing may still be needed. For carpet, clean water usually means new pad and the same carpet. Contaminated water means replacing both.
Many water losses are covered, so it's worth checking. The usual line is sudden versus gradual: a burst supply line is generally covered, and a slow drip often isn't. Flood damage needs a separate flood policy, and a sewer backup may need an extra rider.
The sooner drying starts, the less has to come out. One call gets a local specialist moving toward you.