We Restore Water Damage (888) 596-0163
Menu
Call Now: (888) 596-0163

Water in the house? Call now, and we'll find you a local specialist.

Water Damage Restoration in Kirkland, WA

Whatever got wet in your Kirkland home, the next few hours matter more than the next few days. Call us and we'll find a restoration specialist from our network who works in King County, Washington, and can get dehumidifiers and extraction equipment to you soon.

Call Now: (888) 596-0163

Someone picks up, day or night.

Gutted room with metal stud framing and new drywall sheets during water damage repairs

What we know about water in Kirkland

King County, Washington. Public records, linked in each box.
Source: ACS 2023 5-year, table B25035
1983
Half the homes around Kirkland were built before this year

That's newer than 72% of the 28,807 US places we track. Newer doesn't mean leak-proof, though. It only changes what's likely to fail.

Source: NOAA 1991-2020 Climate Normals, station USW00094290
37.8 in
Inches of precipitation in a normal year, rain and snow together

Around 62% of the 30,291 places we track get more than this. Less rain doesn't mean less risk indoors. Most damage here starts with plumbing, and when a big storm does come, dry ground doesn't soak it up.

Source: NOAA 1991-2020 Climate Normals, station USW00094290
NOV
Most precipitation of the year comes in November

If you've been meaning to clear the gutters, do it before November comes around.

Source: OpenFEMA Disaster Declarations Summaries v2, 2016-01-01 to 2026-10-31
9
Weather or water disasters out of 29 federal declarations for King County since 2016
  • Flood7
  • Severe Storm2

Flooding leads the list here. Floodwater is never clean, so anything it touches needs more than drying. Not counted here: 20 more for things like fires or the pandemic.

Before anyone arrives

First steps for a Kirkland water emergency

You don't have to do all of this. Do what's safe, in this order, and leave the rest.

  1. Shut off the water

    Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.

  2. Stay clear of the power

    If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.

  3. Take pictures first

    Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.

  4. Rescue what you can

    Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.

  5. Let the air move

    If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.

Call Now: (888) 596-0163

You've got about 24 to 48 hours to start drying before rot and mold become the bigger problem.

Typical build year

The usual weak spots in Kirkland homes

If your house dates from the late 1970s to the mid 1990s, take a look at the pipes. Polybutylene went into a lot of homes in those years. It's gray plastic, and it has a habit of failing with no warning. You can often spot it at the water heater or under a sink.

Then there's the water heater itself. Most tanks last 8 to 12 years, so a house this age is probably on its second or third, and yours may be getting close. If you see polybutylene, it's worth asking a plumber about it, even if nothing's leaking yet.

Call Now: (888) 596-0163
Gloved hands fitting a threaded pipe to a radiator

How we can help in Kirkland

The Pacific Northwest

Why water behaves differently in Kirkland

Weather

It's less about one big storm than about months of wet. West of the mountains, roofs and walls hardly get the chance to dry between October and April, and an atmospheric river can flood rivers on top of that. On the dry side, your bigger worry is frozen pipes and ice dams.

Buildings

Crawlspaces are the standard foundation in many towns, and they stay damp through the rainy months. Wood siding, cedar shakes and heavy timber all take on water. Sill plates sitting just above the foundation are often the first bits of framing to rot.

Ground

By midwinter, the ground has taken all it can. In the lowlands, dense clay holds water near the surface, so crawlspaces can flood with no pipe problem at all. It's worth checking that your vapor barrier and any drains are doing their job.

Drying

Cool, wet air is hard to dry. That's where desiccant units come in, since they keep pulling water at low temperatures. Set up inside sealed containment, they can get a crawlspace and subfloor dry even in the middle of the rainy season.

When you call

What to expect once you've called from Kirkland

It starts with a few quick questions: your address, what happened and how long it's been wet. Then we'll connect you with someone from our network who works in King County. Your own home, a rental or a business, you'll know what's next before the call ends.

Before any equipment goes in, the specialist needs to know two things: how far the water got, and how dirty it is. Thermal cameras and moisture meters answer the first. For the second, there are three answers: Category 1, clean water, Category 2, dirty water, or Category 3, sewage and floodwater. With Category 3, plastic containment goes up and negative air machines with HEPA filters keep your house's air clean.

Drying is a process, and you'll have strange machines in the house for a few days. The bulk of the water goes first, by truck-mounted or portable extractor. Air movers then lift moisture off surfaces, and low grain refrigerant (LGR) dehumidifiers remove it from the air. A cold building or dense material may need desiccant units instead. Daily psychrometric readings show if the air is still pulling water out.

The finish line isn't when things look dry. Readings from dry wood and drywall in your own house set the target, called the dry standard, and the equipment stays until the wet areas reach it. That's the IICRC S500 standard for water damage at work, and those daily records are what your insurance company wants to see.

Call Now: (888) 596-0163

What you can save and what has to go in Kirkland

A lot of it can stay if you move quickly. If the water was clean, the carpet is often fine once the pad is replaced. Hardwood needs slow, careful drying with mats, and it may want refinishing at the end. Drywall is the easy one: a flood cut takes off the wet part, a little above the waterline, and the top of the wall is untouched.

If it was sewage or floodwater, porous things usually can't be saved. Carpet, pad and soaked insulation go in the dumpster, and studs and hard floors get cleaned and disinfected. Keep clear of any gas appliance that was underwater, and of any floor with a bit of bounce, until a professional has checked them.

Water damage help across Kirkland

Wherever you are in Kirkland, the number's the same. We'll connect you with a specialist working in King County, for a home or a commercial building.

ZIP codes in Kirkland

  • 98039
  • 98033
  • 98034
  • 98083

Other towns in Washington

What people in Kirkland ask us

How fast can someone get to me in Kirkland?

We aim to have a specialist on the way the same day, often within hours. When a big storm hits all of King County at once, it can take longer, so it pays to call early. The steps above will help while you wait.

Can I clean up water damage myself?

If it's small, clean and caught quickly, go ahead. If it has been sitting, has gone under the floor or smells bad, that's the time to call. The trouble with doing it yourself is that everything can look dry on top and still be wet underneath.

How long does it take to dry out a house?

Most homes take three to five days of drying once the water's out. Dense materials such as hardwood and plaster can take longer, and any rebuilding comes afterward.

Can wet hardwood floors and carpet be saved?

It depends on time and on the water. For hardwood, floor drying panels and patience can do a lot, though refinishing may still be needed. For carpet, clean water usually means new pad and the same carpet. Contaminated water means replacing both.

Will my insurance pay for water damage?

Many water losses are covered, so it's worth checking. The usual line is sudden versus gradual: a burst supply line is generally covered, and a slow drip often isn't. Flood damage needs a separate flood policy, and a sewer backup may need an extra rider.

Don't wait on water in Kirkland

(888) 596-0163

Day or night, someone picks up. We'll connect you with a specialist who works in King County.

Call Now: (888) 596-0163