Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
Water where it shouldn't be gets stressful fast, and it keeps spreading while you work out what to do. If it's a burst pipe, a soaked ceiling or storm water at the door in Everett, Washington, call us. We'll get a specialist from our network of local restoration companies moving toward you, with extraction equipment and dehumidifiers.
Call Now: (888) 596-0163Someone picks up, day or night.
That's newer than 66% of the 28,807 US places we track. Newer doesn't mean leak-proof, though. It only changes what's likely to fail.
Everett gets less than 71% of the 30,291 places on our list. Less rain doesn't mean less risk indoors. Most damage here starts with plumbing, and when a big storm does come, dry ground doesn't soak it up.
A look at the roof, gutters and downspouts before November is the cheapest repair you'll ever make.
Flooding leads the list here. Floodwater is never clean, so anything it touches needs more than drying. We've left out 20 for other causes, such as fire or the pandemic.
Before anyone arrives
A few minutes now can save days of drying later. If something doesn't feel safe, skip it and tell us when you call.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
You've got about 24 to 48 hours to start drying before rot and mold become the bigger problem.
Typical build year
If your house dates from the late 1970s to the mid 1990s, take a look at the pipes. Polybutylene went into a lot of homes in those years. It's gray plastic, and it has a habit of failing with no warning. You can often spot it at the water heater or under a sink.
Then there's the water heater itself. Most tanks last 8 to 12 years, so a house this age is probably on its second or third, and yours may be getting close. If you see polybutylene, it's worth asking a plumber about it, even if nothing's leaking yet.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Pacific Northwest
The rain here wears things down slowly. A small gap in the siding or a tired roof can let in a little water all winter long, and you may not notice until spring. To the east, the risk looks different, with hard freezes and ice taking most of the blame.
Lots of wood and lots of rain make a tricky pair. Framing that gets wet here may not dry out by itself until summer. Sill plates and rim joists sit right where water collects, so that's where a specialist will usually look first.
Wet ground is the normal condition here for months at a time. Heavy clay doesn't let it through, so groundwater can stand under a house long after a storm. On a hillside, all that water is also working its way downhill toward your foundation.
With steady rain and humidity near 100 percent, a building can't dry on its own. Commercial desiccant dehumidifiers run inside sealed containment to pull moisture out of soaked sill plates and subfloors.
When you call
It starts with a few quick questions: your address, what happened and how long it's been wet. Then we'll connect you with someone from our network who works in Snohomish County. Your own home, a rental or a business, you'll know what's next before the call ends.
Expect a walk through the house with a thermal camera and a moisture meter, because what you can see is usually only part of it. The specialist will also tell you which of the three categories you've got. Category 1 water is clean, Category 2 is dirty, and Category 3 is sewage or floodwater. That last one changes the job, with plastic containment around the work area and negative air machines pushing air through HEPA filters.
Getting the water out is the quick part. A truck-mounted or portable extractor handles that. After that, air movers sweep across wet surfaces, and low grain refrigerant (LGR) dehumidifiers take that moisture out of the room. In cold or dense spaces, desiccant dehumidifiers work better. You'll hear the machines day and night for a while, and daily psychrometric readings of the air show that they're working.
So how do you know it's done? It's done when the numbers say so. A dry baseline from untouched materials in your house is the target, and each wet area has to reach it before the equipment leaves. It follows the IICRC S500 standard, and you get a record of the readings for your insurance claim.
A lot of it can stay if you move quickly. If the water was clean, the carpet is often fine once the pad is replaced. Hardwood needs slow, careful drying with mats, and it may want refinishing at the end. Drywall is the easy one: a flood cut takes off the wet part, a little above the waterline, and the top of the wall is untouched.
If it was sewage or floodwater, porous things usually can't be saved. Carpet, pad and soaked insulation go in the dumpster, and studs and hard floors get cleaned and disinfected. Keep clear of any gas appliance that was underwater, and of any floor with a bit of bounce, until a professional has checked them.
We take calls from all over Everett and the rest of Snohomish County, for houses, apartments and commercial buildings. If you're not sure you're close enough, just ask.
In most cases you'll have someone on the way that day. You can ask for a time when you're connected with the specialist. It may take longer after a storm, when much of Everett needs help at once.
Small and clean, yes. Large or dirty, no. A shop vac and fans can deal with a little water on a hard surface, but they won't reach what's soaked into drywall and subfloor. That hidden moisture is where mold and rot get started.
It depends on how much got wet and for how long. A fresh leak in one room could be dry in a couple of days, while a soaked floor and walls may need a week. You'll see daily readings, so you'll know how it's going.
Hardwood is more forgiving than people think. Floor drying mats pull moisture up through the boards, and refinishing can take care of what's left. Carpet can usually stay if the water was clean, as long as the pad's replaced. If the water was dirty, it can't.
Many water losses are covered, so it's worth checking. The usual line is sudden versus gradual: a burst supply line is generally covered, and a slow drip often isn't. Flood damage needs a separate flood policy, and a sewer backup may need an extra rider.
It's quick. Give us your address, and we'll connect you with a local specialist who can tell you when they'll be there.