Water Damage Restoration in Arlington, WA

Water where it shouldn't be gets stressful fast, and it keeps spreading while you work out what to do. If it's a burst pipe, a soaked ceiling or storm water at the door in Arlington, Washington, call us. We'll get a specialist from our network of local restoration companies moving toward you, with extraction equipment and dehumidifiers.

Call Now: (888) 596-0163

Someone picks up, day or night.

Gutted room with metal stud framing and new drywall sheets during water damage repairs

Water in Arlington by the numbers

Snohomish County, Washington. Public records, linked in each box.
Source: ACS 2023 5-year, table B25035
1995
The middle year for homes around Arlington. Half are older

Housing here is newer than in 90% of the 28,807 places on our list. So you're less likely to have old pipes, and more likely to have plastic lines and fittings that are starting to age.

Source: NOAA 1991-2020 Climate Normals, station USC00450257
49 in
Inches of rain and melted snow in a normal year

Arlington gets more than 76% of the 30,291 places on our list. It's enough that a clogged gutter or a poor slope by the wall will show itself sooner or later.

Source: NOAA 1991-2020 Climate Normals, station USC00450257
NOV
Most precipitation of the year comes in November

A look at the roof, gutters and downspouts before November is the cheapest repair you'll ever make.

Source: OpenFEMA Disaster Declarations Summaries v2, 2016-01-01 to 2026-10-31
11
Weather or water disasters out of 31 federal declarations for Snohomish County since 2016
  • Flood6
  • Severe Storm5

Floods top this list, and flood damage needs its own kind of cleanup, because of what the water carries in. That leaves out 20 for causes such as fire or the pandemic.

Before anyone arrives

What to do first if you're in Arlington

No need to get it perfect. These are the things that make the biggest difference, in order.

  1. Shut off the water

    Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.

  2. Stay clear of the power

    If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.

  3. Take pictures first

    Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.

  4. Rescue what you can

    Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.

  5. Let the air move

    If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.

Call Now: (888) 596-0163

Mold can get started within 24 to 48 hours, so it's worth calling even if the worst seems over.

Typical build year

What to check around Arlington before it leaks

If your house dates from the late 1970s to the mid 1990s, take a look at the pipes. Polybutylene went into a lot of homes in those years. It's gray plastic, and it has a habit of failing with no warning. You can often spot it at the water heater or under a sink.

Then there's the water heater itself. Most tanks last 8 to 12 years, so a house this age is probably on its second or third, and yours may be getting close. If you see polybutylene, it's worth asking a plumber about it, even if nothing's leaking yet.

Call Now: (888) 596-0163
Gloved hands fitting a threaded pipe to a radiator

From first call to final repair in Arlington

The Pacific Northwest

What's different about water damage in Arlington

Weather

It's less about one big storm than about months of wet. West of the mountains, roofs and walls hardly get the chance to dry between October and April, and an atmospheric river can flood rivers on top of that. On the dry side, your bigger worry is frozen pipes and ice dams.

Buildings

Have a look in your crawlspace at the end of the wet season. That's where a slow leak or poor drainage shows up, and damp air there can reach the floor above. Wood siding and cedar roofs look great, but they do need upkeep to keep the water out.

Ground

Soil stays saturated for much of the wet season, and glacial clay in many lowland areas barely drains at all. Water collects in crawlspaces and against foundations, and it can stay there for weeks after the rain lets up.

Drying

With steady rain and humidity near 100 percent, a building can't dry on its own. Commercial desiccant dehumidifiers run inside sealed containment to pull moisture out of soaked sill plates and subfloors.

When you call

What to expect once you've called from Arlington

Don't worry about having the right words. Just tell us what you're seeing. We'll get your address and a rough idea of the damage, then put you through to a specialist in our network who works around Arlington. They handle homes and commercial property, and they'll give you a time.

Before any equipment goes in, the specialist needs to know two things: how far the water got, and how dirty it is. Thermal cameras and moisture meters answer the first. For the second, there are three answers: Category 1, clean water, Category 2, dirty water, or Category 3, sewage and floodwater. With Category 3, plastic containment goes up and negative air machines with HEPA filters keep your house's air clean.

Most of the job is drying, and it's slower than people expect. Extraction units, often truck-mounted, take out the bulk water. Air movers and low grain refrigerant (LGR) dehumidifiers then do the long, loud work of pulling moisture out of walls and floors. Desiccant units come in when it's too cold or the materials are too dense for LGR machines. Psychrometric readings, which are daily checks of temperature and humidity, tell the specialist if the setup needs changing.

Nobody should take the machines away just because a wall feels dry. The target is the dry standard, measured from sound materials in your own home, and the job follows the IICRC S500 standard until the readings match. Ask for a copy of the daily log. Your insurer will want it.

Call Now: (888) 596-0163

What you can save and what has to go in Arlington

Most people expect to lose more than they do. Carpet that's only had clean water on it can usually be dried, though the pad underneath gets replaced. Drying mats can bring cupped hardwood back, given time. Walls often need only a flood cut, where the bottom of the drywall comes off and new board goes in.

Sewage and floodwater are a different story. Carpet they've touched has to go, and what stays gets cleaned and treated with an antimicrobial. Two more things to check before you use the room again: a gas appliance that sat in water, and any floor that feels soft underfoot.

Arlington and the rest of Snohomish County

From one end of Arlington to the other, and on through Snohomish County, the first step is the same call. Homes and businesses are both covered.

ZIP codes in Arlington

  • 98223

Other Washington service areas

What people in Arlington ask us

How fast can someone get to me in Arlington?

Usually the same day, and often within a few hours. It depends on who's closest and how busy Snohomish County is. If a storm has just gone through, everyone's calling at once, so call as soon as you can.

Can I clean up water damage myself?

Some of it, yes. A bit of clean water on tile is a job for a mop and a fan. It's different when water has got under the flooring or into a wall, or when it's dirty. Household fans can't dry a wall cavity, and sewage isn't safe to handle.

How long does it take to dry out a house?

A small leak that's caught early may dry in two or three days. A flooded room with wet subfloor and insulation can take a week or more, and repairs start after that.

Can wet hardwood floors and carpet be saved?

Quite often. Floor mats and steady air can save hardwood that would otherwise be torn out, so tell the specialist about it first thing. With carpet, it all depends on the water: clean means dry it and replace the pad, sewage or floodwater means it comes out.

Will my insurance pay for water damage?

It usually depends on where the water came from. A homeowners policy usually covers a burst pipe. Outside flooding needs separate flood insurance, and sewer backup often needs an add-on. It's worth reading your policy, and it's worth having those photos.

Need help with water in Arlington?

(888) 596-0163

The sooner drying starts, the less has to come out. One call gets a local specialist moving toward you.

Call Now: (888) 596-0163