Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water Damage Restoration in Smyer, TX
Water where it shouldn't be gets stressful fast, and it keeps spreading while you work out what to do. If it's a burst pipe, a soaked ceiling or storm water at the door in Smyer, Texas, call us. We'll get a specialist from our network of local restoration companies moving toward you, with extraction equipment and dehumidifiers.
Call Now: (888) 596-0163Someone picks up, day or night.
What we know about water in Smyer
Hockley County, Texas. Public records, linked in each box.- Source: ACS 2023 5-year, table B25035
- 1988Half of the housing around Smyer went up before this
Housing here is newer than in 80% of the 28,807 places on our list. So you're less likely to have old pipes, and more likely to have plastic lines and fittings that are starting to age.
- Source: NOAA 1991-2020 Climate Normals, station US1TXLK0007
- 18.1 inRain and melted snow, in inches, in a typical year
Smyer gets less than 88% of the 30,291 places on our list. Low totals can fool you. Roofs and drains get little practice here, so problems tend to show up all at once in the one big storm.
- Source: NOAA 1991-2020 Climate Normals, station US1TXLK0007
- SEPThe wettest part of the year here: September
Check your drains and the slope around the house ahead of September. It takes an afternoon, and it can save a lot of drying later.
- Source: OpenFEMA Disaster Declarations Summaries v2, 2016-01-01 to 2026-10-31
- 4Weather or water disasters out of 7 federal declarations for Hockley County since 2016
- Severe Ice Storm2
- Flood1
- Severe Storm1
Ice and snow come first here. It's the hard freeze that does the damage, so know where your main valve is before one arrives. We've left out 3 for other causes, such as fire or the pandemic.
Before anyone arrives
What to do right now in Smyer
You don't have to do all of this. Do what's safe, in this order, and leave the rest.
Shut off the water
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
Stay clear of the power
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Take pictures first
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Rescue what you can
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
Let the air move
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
Call Now: (888) 596-0163
Mold can get started within 24 to 48 hours, so it's worth calling even if the worst seems over.
Typical build year
What tends to fail in Smyer houses like yours
Homes from these years often had plastic plumbing put in, and one type stands out. Polybutylene, usually gray and often stamped PB, was widely used until the mid 1990s and is known for failing without warning, usually at the fittings.
Check the exposed lines near your water heater and under the sinks. While you're there, look at the tank's age on its label. Eight to twelve years is about all you can expect, and when one fails, it fails on the floor.
Call Now: (888) 596-0163
Help for every kind of water problem in Smyer
Water Damage Cleanup & Extraction
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Flood Damage Restoration
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
Basement Water Damage Restoration
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Structural Drying and Dehumidification
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Water Damage Repair and Restoration
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The southern plains
Why water behaves differently in Smyer
Weather
The weather here swings between extremes: hail and heavy rain in spring, long hot summers, and winter cold snaps that arrive with little warning. Each brings its own kind of leak, from a wet ceiling after a storm to a burst line in the wall when the thaw comes.
Buildings
Across the southern part of this region, most homes sit on concrete slabs with the pipes underneath, so a slab leak can soak your flooring for weeks before there's anything to see. A warm spot on the floor or a water bill that jumps for no reason is often the first clue. Farther north, basements are more common, and that's where the water ends up.
Ground
Clay soil swells when it's wet and shrinks when it's dry. Over the years, that movement can crack a slab and the pipes beneath it. It also sheds hard rain instead of soaking it up, and that water has to go somewhere, often toward your garage or back door.
Drying
A leak under a slab needs its own approach. Specialists use acoustic listening equipment and thermal imaging to find the break without jackhammering the whole floor, and then dry the flooring and the bottom of the walls around it.
When you call
What to expect once you've called from Smyer
Don't worry about having the right words. Just tell us what you're seeing. We'll get your address and a rough idea of the damage, then put you through to a specialist in our network who works around Smyer. They handle homes and commercial property, and they'll give you a time.
Expect a walk through the house with a thermal camera and a moisture meter, because what you can see is usually only part of it. The specialist will also tell you which of the three categories you've got. Category 1 water is clean, Category 2 is dirty, and Category 3 is sewage or floodwater. That last one changes the job, with plastic containment around the work area and negative air machines pushing air through HEPA filters.
Then comes the drying, and this is the part people underestimate. Standing water comes out first, with truck-mounted or portable units. Air movers then push moist air off wet surfaces, while low grain refrigerant (LGR) dehumidifiers pull the water out of the air. If your house runs cold or the materials are dense, desiccant units can take over. Each day, readings of temperature and humidity, known as psychrometric readings, show whether the machines are keeping up.
So how do you know it's done? It's done when the numbers say so. A dry baseline from untouched materials in your house is the target, and each wet area has to reach it before the equipment leaves. It follows the IICRC S500 standard, and you get a record of the readings for your insurance claim.
What can usually be saved in a Smyer home
More than you'd think, if it's caught early. Carpet soaked with clean water can often be dried in place once the pad's been pulled. Hardwood is worth trying to save too, with floor drying mats and slow drying, though it may need refinishing. Drywall that's wet only at the base can be cut a little above the waterline instead of being replaced to the ceiling, which is what a flood cut is.
Contaminated water is where the rules get strict. Sewage or floodwater means the carpet and pad come out, along with wet insulation, and what's left gets an antimicrobial treatment. It's also not safe to relight a gas appliance that's been underwater until someone's checked it, and a soft floor needs a look before anyone stands on it.
Where we take calls around Smyer
Calls come to us from homeowners, landlords and business owners across Smyer and Hockley County. Give us your address, and we'll find out who's closest.
ZIP codes in Smyer
- 79407
- 79367
Questions we hear from Smyer
How fast can someone get to me in Smyer?
Usually the same day, and often within a few hours. It depends on who's closest and how busy Hockley County is. If a storm has just gone through, everyone's calling at once, so call as soon as you can.
Can I clean up water damage myself?
Small and clean, yes. Large or dirty, no. A shop vac and fans can deal with a little water on a hard surface, but they won't reach what's soaked into drywall and subfloor. That hidden moisture is where mold and rot get started.
How long does it take to dry out a house?
A small leak that's caught early may dry in two or three days. A flooded room with wet subfloor and insulation can take a week or more, and repairs start after that.
Can wet hardwood floors and carpet be saved?
Hardwood is more forgiving than people think. Floor drying mats pull moisture up through the boards, and refinishing can take care of what's left. Carpet can usually stay if the water was clean, as long as the pad's replaced. If the water was dirty, it can't.
Will my insurance pay for water damage?
Often, but not always. Insurers tend to pay for sudden leaks and not for long-term seepage. Flooding from outside needs its own policy. Call your insurance company early, and keep the moisture logs and photos, since they make the claim much easier.
Get help in Smyer now
(888) 596-0163Day or night, someone picks up. We'll connect you with a specialist who works in Hockley County.