Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
Water where it shouldn't be gets stressful fast, and it keeps spreading while you work out what to do. If it's a burst pipe, a soaked ceiling or storm water at the door in Riverside, Texas, call us. We'll get a specialist from our network of local restoration companies moving toward you, with extraction equipment and dehumidifiers.
Call Now: (888) 596-0163Someone picks up, day or night.
Homes around Riverside are newer than in 94% of the 28,807 places we track, which changes what tends to go wrong more than whether it does.
Riverside gets more than 83% of the 30,291 places on our list. That's plenty of water to find a tired roof, a blocked downspout or a low spot by the foundation.
Check your drains and the slope around the house ahead of June. It takes an afternoon, and it can save a lot of drying later.
Floods top this list, and flood damage needs its own kind of cleanup, because of what the water carries in. Not counted here: 3 more for things like fires or the pandemic.
Before anyone arrives
Go through these in order and skip anything that doesn't feel safe. None of it is worth getting hurt over.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
The clock on mold is roughly 24 to 48 hours, which is why we'd rather hear from you early.
Typical build year
Most leaks in a newer house don't start in the walls. They start at the things connected to them: the water heater, the washing machine hoses, the fridge's ice maker line and the flexible connectors under sinks and toilets.
Have a look at each one once a year and replace anything bulging, rusty or kinked. Many water heaters from the early building boom are now reaching the 8 to 12 year point where they tend to fail, so check the date on yours.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The southern plains
Most of the trouble here follows the weather. Lines of thunderstorms bring hail and wind that tear at roofs, slow storms dump more rain than the ground can take, and flash floods can reach homes nowhere near a river. Every few winters, a deep freeze catches out supply lines nobody thought to insulate.
A lot of homes here are built on slabs, with brick veneer over wood framing. Water that gets behind the brick can wet the studs and insulation without showing inside. Older neighborhoods still have pier-and-beam houses, where moisture collects in the crawlspace. Attic water heaters and air conditioning units add another risk, because a clogged condensate line drains straight through your ceiling.
The soil doesn't help much. Dense clay and flat lots keep water sitting after a storm, and grading that once sent water away from your house can settle over time. If your gutters empty right against the foundation, that's the first thing to fix.
Finding water under concrete takes the right tools. Acoustic leak detection narrows down the break, and a thermal camera shows how far it has spread through the flooring, so only a small part of the slab has to be opened up.
When you call
Don't worry about having the right words. Just tell us what you're seeing. We'll get your address and a rough idea of the damage, then put you through to a specialist in our network who works around Riverside. They handle homes and commercial property, and they'll give you a time.
When the specialist arrives, the first job is finding where the water went, because that's rarely where it's pooled. Thermal cameras and moisture meters show how far it has traveled behind walls. They'll also work out what kind of water it is. Category 1 is clean water from a supply line, Category 2 is dirty, like a washer overflow, and Category 3 is sewage or floodwater. Category 3 means sealing the area with plastic, called containment, and running negative air machines with HEPA filters to keep the dirty air away from the rest of your home.
Then comes the drying, and this is the part people underestimate. Standing water comes out first, with truck-mounted or portable units. Air movers then push moist air off wet surfaces, while low grain refrigerant (LGR) dehumidifiers pull the water out of the air. If your house runs cold or the materials are dense, desiccant units can take over. Each day, readings of temperature and humidity, known as psychrometric readings, show whether the machines are keeping up.
The finish line isn't when things look dry. Readings from dry wood and drywall in your own house set the target, called the dry standard, and the equipment stays until the wet areas reach it. That's the IICRC S500 standard for water damage at work, and those daily records are what your insurance company wants to see.
A lot of it can stay if you move quickly. If the water was clean, the carpet is often fine once the pad is replaced. Hardwood needs slow, careful drying with mats, and it may want refinishing at the end. Drywall is the easy one: a flood cut takes off the wet part, a little above the waterline, and the top of the wall is untouched.
If it was sewage or floodwater, porous things usually can't be saved. Carpet, pad and soaked insulation go in the dumpster, and studs and hard floors get cleaned and disinfected. Keep clear of any gas appliance that was underwater, and of any floor with a bit of bounce, until a professional has checked them.
Wherever you are in Riverside, the number's the same. We'll connect you with a specialist working in Walker County, for a home or a commercial building.
Often within hours. Our network covers Walker County, and we'll look for whoever can reach you soonest. Storms are the exception, because every crew in the area gets busy, so please don't wait to see if it gets worse.
If it's small, clean and caught quickly, go ahead. If it has been sitting, has gone under the floor or smells bad, that's the time to call. The trouble with doing it yourself is that everything can look dry on top and still be wet underneath.
A small leak that's caught early may dry in two or three days. A flooded room with wet subfloor and insulation can take a week or more, and repairs start after that.
Usually, with clean water and a fast start. Drying mats sit on hardwood and draw the moisture out slowly so the boards don't split. Sanding and refinishing can fix any cupping that's left. Carpet needs a new pad, and it can't be saved at all after sewage or floodwater.
It usually depends on where the water came from. A homeowners policy usually covers a burst pipe. Outside flooding needs separate flood insurance, and sewer backup often needs an add-on. It's worth reading your policy, and it's worth having those photos.
The sooner drying starts, the less has to come out. One call gets a local specialist moving toward you.