Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
Whatever got wet in your Morse home, the next few hours matter more than the next few days. Call us and we'll find a restoration specialist from our network who works in Hansford County, Texas, and can get dehumidifiers and extraction equipment to you soon.
Call Now: (888) 596-0163Someone picks up, day or night.
That's older than 75% of the 28,807 US places we track. Older homes often have pipes and drains that have been patched more than once.
That's drier than 86% of the 30,291 places we track. Low totals can fool you. Roofs and drains get little practice here, so problems tend to show up all at once in the one big storm.
Check your drains and the slope around the house ahead of June. It takes an afternoon, and it can save a lot of drying later.
Ice and winter storms lead the list here. Pipes freeze and split, and you often don't know until the thaw, when the water starts running. That leaves out 3 for causes such as fire or the pandemic.
Before anyone arrives
A few minutes now can save days of drying later. If something doesn't feel safe, skip it and tell us when you call.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
You've got about 24 to 48 hours to start drying before rot and mold become the bigger problem.
Typical build year
A lot of plumbing from these years has reached the end of its life. Galvanized steel narrows from the inside as it rusts, so weak water pressure can be a warning, not just an annoyance. Cast iron drains can crack, and fittings where old meets new are often the first thing to go.
Have a look under the kitchen and bathroom sinks and around the water heater. Any rust, drips or green staining is worth having a plumber check before it turns into a call to us.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The southern plains
The weather here swings between extremes: hail and heavy rain in spring, long hot summers, and winter cold snaps that arrive with little warning. Each brings its own kind of leak, from a wet ceiling after a storm to a burst line in the wall when the thaw comes.
A lot of homes here are built on slabs, with brick veneer over wood framing. Water that gets behind the brick can wet the studs and insulation without showing inside. Older neighborhoods still have pier-and-beam houses, where moisture collects in the crawlspace. Attic water heaters and air conditioning units add another risk, because a clogged condensate line drains straight through your ceiling.
Clay soil swells when it's wet and shrinks when it's dry. Over the years, that movement can crack a slab and the pipes beneath it. It also sheds hard rain instead of soaking it up, and that water has to go somewhere, often toward your garage or back door.
Water under a slab rarely shows on top. Acoustic equipment listens for the break in the line, thermal imaging maps the wet area, and drying then goes after the carpet, pad and bottom plates above it. It saves a lot of demolition.
When you call
Don't worry about having the right words. Just tell us what you're seeing. We'll get your address and a rough idea of the damage, then put you through to a specialist in our network who works around Morse. They handle homes and commercial property, and they'll give you a time.
Water travels through walls without leaving a mark, so the first step is measuring, not mopping. A thermal camera and moisture meters map the wet area. Next comes the question of what's in the water. Category 1 is clean supply water. Category 2 has been in contact with something, like a dishwasher overflow. Category 3 is sewage or floodwater, and it calls for containment: plastic sheeting, plus negative air machines with HEPA filters, so nothing spreads through the house.
Getting the water out is the quick part. A truck-mounted or portable extractor handles that. After that, air movers sweep across wet surfaces, and low grain refrigerant (LGR) dehumidifiers take that moisture out of the room. In cold or dense spaces, desiccant dehumidifiers work better. You'll hear the machines day and night for a while, and daily psychrometric readings of the air show that they're working.
So how do you know it's done? It's done when the numbers say so. A dry baseline from untouched materials in your house is the target, and each wet area has to reach it before the equipment leaves. It follows the IICRC S500 standard, and you get a record of the readings for your insurance claim.
A lot of it can stay if you move quickly. If the water was clean, the carpet is often fine once the pad is replaced. Hardwood needs slow, careful drying with mats, and it may want refinishing at the end. Drywall is the easy one: a flood cut takes off the wet part, a little above the waterline, and the top of the wall is untouched.
The exception is dirty water. Whatever soft material sewage or floodwater touched has to be removed, and the rest gets an antimicrobial cleaning. Don't relight a gas heater or water heater that sat in water, and if a floor feels soft, stay off it and mention it on the call.
We take calls from all over Morse and the rest of Hansford County, for houses, apartments and commercial buildings. If you're not sure you're close enough, just ask.
Often within hours. Our network covers Hansford County, and we'll look for whoever can reach you soonest. Storms are the exception, because every crew in the area gets busy, so please don't wait to see if it gets worse.
You can handle a minor spill if it's clean water and it hasn't gone anywhere. For anything that's reached the carpet pad, the walls or the floor below, professional drying really does make a difference, and floodwater or sewage should be left to people with the right protective gear.
Most homes take three to five days of drying once the water's out. Dense materials such as hardwood and plaster can take longer, and any rebuilding comes afterward.
Hardwood is more forgiving than people think. Floor drying mats pull moisture up through the boards, and refinishing can take care of what's left. Carpet can usually stay if the water was clean, as long as the pad's replaced. If the water was dirty, it can't.
Many water losses are covered, so it's worth checking. The usual line is sudden versus gradual: a burst supply line is generally covered, and a slow drip often isn't. Flood damage needs a separate flood policy, and a sewer backup may need an extra rider.
It's quick. Give us your address, and we'll connect you with a local specialist who can tell you when they'll be there.