Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
You've found water and you're not sure how bad it is. That's normal, and it's why you can just call. Tell us what's going on in Mason, Texas, and we'll connect you with a local restoration specialist who can bring pumps, truck-mounted extraction and dehumidifiers to your door.
Call Now: (888) 596-0163Someone picks up, day or night.
Housing here is older than in 61% of the 28,807 places on our list. Age alone won't cause a leak, but it does mean more pipe that's been in the wall a long time.
Mason gets less than 78% of the 30,291 places on our list. Dry places aren't off the hook. Hard ground sheds water fast, so one big storm can run straight to your door.
If you've been meaning to clear the gutters, do it before May comes around.
Flooding leads the list here. Floodwater is never clean, so anything it touches needs more than drying. Not counted here: 3 more for things like fires or the pandemic.
Before anyone arrives
These are the steps that help most before anyone gets there. Do what you safely can.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
You've got about 24 to 48 hours to start drying before rot and mold become the bigger problem.
Typical build year
A lot of plumbing from these years has reached the end of its life. Galvanized steel narrows from the inside as it rusts, so weak water pressure can be a warning, not just an annoyance. Cast iron drains can crack, and fittings where old meets new are often the first thing to go.
Have a look under the kitchen and bathroom sinks and around the water heater. Any rust, drips or green staining is worth having a plumber check before it turns into a call to us.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The southern plains
Most of the trouble here follows the weather. Lines of thunderstorms bring hail and wind that tear at roofs, slow storms dump more rain than the ground can take, and flash floods can reach homes nowhere near a river. Every few winters, a deep freeze catches out supply lines nobody thought to insulate.
A lot of homes here are built on slabs, with brick veneer over wood framing. Water that gets behind the brick can wet the studs and insulation without showing inside. Older neighborhoods still have pier-and-beam houses, where moisture collects in the crawlspace. Attic water heaters and air conditioning units add another risk, because a clogged condensate line drains straight through your ceiling.
The soil doesn't help much. Dense clay and flat lots keep water sitting after a storm, and grading that once sent water away from your house can settle over time. If your gutters empty right against the foundation, that's the first thing to fix.
Water under a slab rarely shows on top. Acoustic equipment listens for the break in the line, thermal imaging maps the wet area, and drying then goes after the carpet, pad and bottom plates above it. It saves a lot of demolition.
When you call
We'll ask where you are, what happened and whether the water's still running. That takes a couple of minutes. Then we'll connect you with a specialist from our network who works in Mason County, and you can ask them when they can be there before you hang up. Homes and commercial buildings are both fine.
When the specialist arrives, the first job is finding where the water went, because that's rarely where it's pooled. Thermal cameras and moisture meters show how far it has traveled behind walls. They'll also work out what kind of water it is. Category 1 is clean water from a supply line, Category 2 is dirty, like a washer overflow, and Category 3 is sewage or floodwater. Category 3 means sealing the area with plastic, called containment, and running negative air machines with HEPA filters to keep the dirty air away from the rest of your home.
Most of the job is drying, and it's slower than people expect. Extraction units, often truck-mounted, take out the bulk water. Air movers and low grain refrigerant (LGR) dehumidifiers then do the long, loud work of pulling moisture out of walls and floors. Desiccant units come in when it's too cold or the materials are too dense for LGR machines. Psychrometric readings, which are daily checks of temperature and humidity, tell the specialist if the setup needs changing.
A wall can feel dry and still hold plenty of water. That's why the specialist measures a dry standard from unaffected wood and drywall nearby and keeps the equipment running until the wet areas match. This is the method in the IICRC S500 standard, and those moisture logs back up your insurance claim.
A lot of it can stay if you move quickly. If the water was clean, the carpet is often fine once the pad is replaced. Hardwood needs slow, careful drying with mats, and it may want refinishing at the end. Drywall is the easy one: a flood cut takes off the wet part, a little above the waterline, and the top of the wall is untouched.
Things change when the water's dirty. Anything soft that sewage or floodwater reached, such as carpet, pad and insulation, gets thrown out. Hard surfaces get cleaned and treated. Have a professional look at any gas appliance that got wet before you turn it back on, and don't walk on a floor that's gone spongy.
Calls come to us from homeowners, landlords and business owners across Mason and Mason County. Give us your address, and we'll find out who's closest.
It depends on the time and the weather, but same-day help is what we aim for, and it's often a matter of hours. The local specialist will give you a time on the phone, so you're not left guessing.
A small spill of clean water on a hard floor? Sure. Towels and a fan will do it. But if the water's in the walls, the carpet pad or the subfloor, or it came from a sewer or a flood, you'll want it extracted and properly dried. What you can't see is what keeps causing damage.
Most homes take three to five days of drying once the water's out. Dense materials such as hardwood and plaster can take longer, and any rebuilding comes afterward.
Usually, with clean water and a fast start. Drying mats sit on hardwood and draw the moisture out slowly so the boards don't split. Sanding and refinishing can fix any cupping that's left. Carpet needs a new pad, and it can't be saved at all after sewage or floodwater.
It usually depends on where the water came from. A homeowners policy usually covers a burst pipe. Outside flooding needs separate flood insurance, and sewer backup often needs an add-on. It's worth reading your policy, and it's worth having those photos.
Day or night, someone picks up. We'll connect you with a specialist who works in Mason County.