Water Damage Restoration in Fort Worth, TX

Maybe a pipe let go, maybe the storm found a way in. Either way, you don't have to sort this out alone. Call us from Fort Worth, Texas, and we'll put you in touch with a restoration specialist from our network, with truck-mounted extraction and dehumidifiers for the drying that follows.

Call Now: (888) 596-0163

Someone picks up, day or night.

Gutted room with metal stud framing and new drywall sheets during water damage repairs

What we know about water in Fort Worth

Tarrant County, Texas. Public records, linked in each box.
Source: ACS 2023 5-year, table B25035
1992
Half of the housing around Fort Worth went up before this

Housing here is newer than in 86% of the 28,807 places on our list. So you're less likely to have old pipes, and more likely to have plastic lines and fittings that are starting to age.

Source: NOAA 1991-2020 Climate Normals, station USW00013961
35.3 in
Rain and melted snow, in inches, in a typical year

Fort Worth gets less than 67% of the 30,291 places on our list. Dry places aren't off the hook. Hard ground sheds water fast, so one big storm can run straight to your door.

Source: NOAA 1991-2020 Climate Normals, station USW00013961
OCT
Most precipitation of the year comes in October

A look at the roof, gutters and downspouts before October is the cheapest repair you'll ever make.

Source: OpenFEMA Disaster Declarations Summaries v2, 2016-01-01 to 2026-10-31
4
Weather or water disasters out of 7 federal declarations for Tarrant County since 2016
  • Hurricane2
  • Severe Ice Storm2

No one kind of weather leads the list here. Whatever brings the water in, the first job is the same: stop it, then start drying. Not counted here: 3 more for things like fires or the pandemic.

Before anyone arrives

First steps for a Fort Worth water emergency

A few minutes now can save days of drying later. If something doesn't feel safe, skip it and tell us when you call.

  1. Shut off the water

    Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.

  2. Stay clear of the power

    If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.

  3. Take pictures first

    Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.

  4. Rescue what you can

    Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.

  5. Let the air move

    If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.

Call Now: (888) 596-0163

You've got about 24 to 48 hours to start drying before rot and mold become the bigger problem.

Typical build year

What tends to fail in Fort Worth houses like yours

Homes from these years often had plastic plumbing put in, and one type stands out. Polybutylene, usually gray and often stamped PB, was widely used until the mid 1990s and is known for failing without warning, usually at the fittings.

Check the exposed lines near your water heater and under the sinks. While you're there, look at the tank's age on its label. Eight to twelve years is about all you can expect, and when one fails, it fails on the floor.

Call Now: (888) 596-0163
Gloved hands fitting a threaded pipe to a radiator

Help for every kind of water problem in Fort Worth

The southern plains

How local weather and building styles shape water damage in Fort Worth

Weather

Most of the trouble here follows the weather. Lines of thunderstorms bring hail and wind that tear at roofs, slow storms dump more rain than the ground can take, and flash floods can reach homes nowhere near a river. Every few winters, a deep freeze catches out supply lines nobody thought to insulate.

Buildings

A lot of homes here are built on slabs, with brick veneer over wood framing. Water that gets behind the brick can wet the studs and insulation without showing inside. Older neighborhoods still have pier-and-beam houses, where moisture collects in the crawlspace. Attic water heaters and air conditioning units add another risk, because a clogged condensate line drains straight through your ceiling.

Ground

Clay soil swells when it's wet and shrinks when it's dry. Over the years, that movement can crack a slab and the pipes beneath it. It also sheds hard rain instead of soaking it up, and that water has to go somewhere, often toward your garage or back door.

Drying

Water under a slab rarely shows on top. Acoustic equipment listens for the break in the line, thermal imaging maps the wet area, and drying then goes after the carpet, pad and bottom plates above it. It saves a lot of demolition.

When you call

How a Fort Worth water job goes after you call

First we'll want to know three things: where you are in Fort Worth, where the water came from and if it's stopped. From there, we'll connect you with a local specialist from our network, so you're speaking to someone who works in Tarrant County. That goes for homeowners, landlords and businesses alike.

Water travels through walls without leaving a mark, so the first step is measuring, not mopping. A thermal camera and moisture meters map the wet area. Next comes the question of what's in the water. Category 1 is clean supply water. Category 2 has been in contact with something, like a dishwasher overflow. Category 3 is sewage or floodwater, and it calls for containment: plastic sheeting, plus negative air machines with HEPA filters, so nothing spreads through the house.

Drying is a process, and you'll have strange machines in the house for a few days. The bulk of the water goes first, by truck-mounted or portable extractor. Air movers then lift moisture off surfaces, and low grain refrigerant (LGR) dehumidifiers remove it from the air. A cold building or dense material may need desiccant units instead. Daily psychrometric readings show if the air is still pulling water out.

Nobody should take the machines away just because a wall feels dry. The target is the dry standard, measured from sound materials in your own home, and the job follows the IICRC S500 standard until the readings match. Ask for a copy of the daily log. Your insurer will want it.

Call Now: (888) 596-0163

What can be saved in a Fort Worth home

Most people expect to lose more than they do. Carpet that's only had clean water on it can usually be dried, though the pad underneath gets replaced. Drying mats can bring cupped hardwood back, given time. Walls often need only a flood cut, where the bottom of the drywall comes off and new board goes in.

The exception is dirty water. Whatever soft material sewage or floodwater touched has to be removed, and the rest gets an antimicrobial cleaning. Don't relight a gas heater or water heater that sat in water, and if a floor feels soft, stay off it and mention it on the call.

Fort Worth and the rest of Tarrant County

Wherever you are in Fort Worth, the number's the same. We'll connect you with a specialist working in Tarrant County, for a home or a commercial building.

ZIP codes in Fort Worth

  • 76164
  • 76040
  • 76134
  • 76135
  • 76137
  • 76131
  • 76132
  • 76133
  • 76109
  • 76108

More Texas towns we serve

Questions we hear from Fort Worth

How fast can someone get to me in Fort Worth?

Usually the same day, and often within a few hours. It depends on who's closest and how busy Tarrant County is. If a storm has just gone through, everyone's calling at once, so call as soon as you can.

Can I clean up water damage myself?

Some of it, yes. A bit of clean water on tile is a job for a mop and a fan. It's different when water has got under the flooring or into a wall, or when it's dirty. Household fans can't dry a wall cavity, and sewage isn't safe to handle.

How long does it take to dry out a house?

Usually three to five days for the drying alone. The specialist can tell you more after the first readings. Materials such as hardwood, plaster and concrete hold on to water longer, and repairs can only begin when they're dry.

Can wet hardwood floors and carpet be saved?

Usually, with clean water and a fast start. Drying mats sit on hardwood and draw the moisture out slowly so the boards don't split. Sanding and refinishing can fix any cupping that's left. Carpet needs a new pad, and it can't be saved at all after sewage or floodwater.

Will my insurance pay for water damage?

Sudden and accidental damage, such as a pipe that bursts, is usually covered. Slow leaks and rising floodwater usually aren't, unless you've got flood insurance. Take pictures before cleaning up and keep every receipt, because your insurance company will ask.

Get help in Fort Worth now

(888) 596-0163

Tell us what's happening, and we'll line up a specialist from our network in Tarrant County. That's all you need to do for now.

Call Now: (888) 596-0163