Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
You've found water and you're not sure how bad it is. That's normal, and it's why you can just call. Tell us what's going on in Sunriver, Oregon, and we'll connect you with a local restoration specialist who can bring pumps, truck-mounted extraction and dehumidifiers to your door.
Call Now: (888) 596-0163Someone picks up, day or night.
That's newer than 79% of the 28,807 US places we track. Newer doesn't mean leak-proof, though. It only changes what's likely to fail.
That's drier than 97% of the 30,291 places we track. Less rain doesn't mean less risk indoors. Most damage here starts with plumbing, and when a big storm does come, dry ground doesn't soak it up.
If you've been meaning to clear the gutters, do it before December comes around.
Severe storms come first here. If one has been through lately, it's worth a look in the attic, even if your ceilings look fine. We've left out 10 for other causes, such as fire or the pandemic.
Before anyone arrives
You don't have to do all of this. Do what's safe, in this order, and leave the rest.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
You've got about 24 to 48 hours to start drying before rot and mold become the bigger problem.
Typical build year
If your house dates from the late 1970s to the mid 1990s, take a look at the pipes. Polybutylene went into a lot of homes in those years. It's gray plastic, and it has a habit of failing with no warning. You can often spot it at the water heater or under a sink.
Then there's the water heater itself. Most tanks last 8 to 12 years, so a house this age is probably on its second or third, and yours may be getting close. If you see polybutylene, it's worth asking a plumber about it, even if nothing's leaking yet.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Pacific Northwest
West of the Cascades, months of steady rain define the wet season, and atmospheric rivers can add days of heavy downpours and river flooding on top. East of the mountains, snow, ice and hard freezes bring burst pipes and ice dams instead. Either way, buildings can stay damp from fall to spring.
Crawlspaces are the standard foundation in many towns, and they stay damp through the rainy months. Wood siding, cedar shakes and heavy timber all take on water. Sill plates sitting just above the foundation are often the first bits of framing to rot.
Soil stays saturated for much of the wet season, and glacial clay in many lowland areas barely drains at all. Water collects in crawlspaces and against foundations, and it can stay there for weeks after the rain lets up.
With steady rain and humidity near 100 percent, a building can't dry on its own. Commercial desiccant dehumidifiers run inside sealed containment to pull moisture out of soaked sill plates and subfloors.
When you call
We'll ask where you are, what happened and whether the water's still running. That takes a couple of minutes. Then we'll connect you with a specialist from our network who works in Deschutes County, and you can ask them when they can be there before you hang up. Homes and commercial buildings are both fine.
When the specialist arrives, the first job is finding where the water went, because that's rarely where it's pooled. Thermal cameras and moisture meters show how far it has traveled behind walls. They'll also work out what kind of water it is. Category 1 is clean water from a supply line, Category 2 is dirty, like a washer overflow, and Category 3 is sewage or floodwater. Category 3 means sealing the area with plastic, called containment, and running negative air machines with HEPA filters to keep the dirty air away from the rest of your home.
Most of the job is drying, and it's slower than people expect. Extraction units, often truck-mounted, take out the bulk water. Air movers and low grain refrigerant (LGR) dehumidifiers then do the long, loud work of pulling moisture out of walls and floors. Desiccant units come in when it's too cold or the materials are too dense for LGR machines. Psychrometric readings, which are daily checks of temperature and humidity, tell the specialist if the setup needs changing.
A wall can feel dry and still hold plenty of water. That's why the specialist measures a dry standard from unaffected wood and drywall nearby and keeps the equipment running until the wet areas match. This is the method in the IICRC S500 standard, and those moisture logs back up your insurance claim.
Don't write everything off just because it's wet. Clean-water carpet can usually be dried where it sits, with new pad underneath. Hardwood floors respond well to floor drying mats if you get to them early, though you may see some cupping for a while. And drywall usually needs a flood cut near the floor, not a whole new wall.
Things change when the water's dirty. Anything soft that sewage or floodwater reached, such as carpet, pad and insulation, gets thrown out. Hard surfaces get cleaned and treated. Have a professional look at any gas appliance that got wet before you turn it back on, and don't walk on a floor that's gone spongy.
From one end of Sunriver to the other, and on through Deschutes County, the first step is the same call. Homes and businesses are both covered.
In most cases you'll have someone on the way that day. You can ask for a time when you're connected with the specialist. It may take longer after a storm, when much of Sunriver needs help at once.
Small and clean, yes. Large or dirty, no. A shop vac and fans can deal with a little water on a hard surface, but they won't reach what's soaked into drywall and subfloor. That hidden moisture is where mold and rot get started.
It depends on how much got wet and for how long. A fresh leak in one room could be dry in a couple of days, while a soaked floor and walls may need a week. You'll see daily readings, so you'll know how it's going.
Quite often. Floor mats and steady air can save hardwood that would otherwise be torn out, so tell the specialist about it first thing. With carpet, it all depends on the water: clean means dry it and replace the pad, sewage or floodwater means it comes out.
Sudden and accidental damage, such as a pipe that bursts, is usually covered. Slow leaks and rising floodwater usually aren't, unless you've got flood insurance. Take pictures before cleaning up and keep every receipt, because your insurance company will ask.
It's quick. Give us your address, and we'll connect you with a local specialist who can tell you when they'll be there.