Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water Damage Restoration in Fidelity, MO
A leak at 2 a.m. doesn't wait for business hours, and neither do we. If water's getting into your home or business in Fidelity, Missouri, call and we'll line up a nearby specialist who brings the extraction gear and dehumidifiers to deal with it properly.
Call Now: (888) 596-0163Someone picks up, day or night.
Water in Fidelity by the numbers
Jasper County, Missouri. Public records, linked in each box.- Source: ACS 2023 5-year, table B25035
- 1988Half the homes around Fidelity were built before this year
Housing here is newer than in 80% of the 28,807 places on our list. So you're less likely to have old pipes, and more likely to have plastic lines and fittings that are starting to age.
- Source: NOAA 1991-2020 Climate Normals, station US1MOFSA097
- 48.3 inInches of precipitation in a normal year, rain and snow together
74% of the 30,291 places we track come out drier. It's enough that a clogged gutter or a poor slope by the wall will show itself sooner or later.
- Source: NOAA 1991-2020 Climate Normals, station US1MOFSA097
- MAYMost precipitation of the year comes in May
A look at the roof, gutters and downspouts before May is the cheapest repair you'll ever make.
- Source: OpenFEMA Disaster Declarations Summaries v2, 2016-01-01 to 2026-10-31
- 5Of 7 federal disaster declarations for Jasper County since 2016, this many were weather or water
- Flood3
- Severe Storm2
Flooding leads the list here. Floodwater is never clean, so anything it touches needs more than drying. Not counted here: 2 more for things like fires or the pandemic.
Before anyone arrives
What to do first if you're in Fidelity
These are the steps that help most before anyone gets there. Do what you safely can.
Shut off the water
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
Stay clear of the power
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Take pictures first
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Rescue what you can
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
Let the air move
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
Call Now: (888) 596-0163
The clock on mold is roughly 24 to 48 hours, which is why we'd rather hear from you early.
Typical build year
The usual weak spots in Fidelity homes
If your house dates from the late 1970s to the mid 1990s, take a look at the pipes. Polybutylene went into a lot of homes in those years. It's gray plastic, and it has a habit of failing with no warning. You can often spot it at the water heater or under a sink.
Then there's the water heater itself. Most tanks last 8 to 12 years, so a house this age is probably on its second or third, and yours may be getting close. If you see polybutylene, it's worth asking a plumber about it, even if nothing's leaking yet.
Call Now: (888) 596-0163
Help for every kind of water problem in Fidelity
Water Damage Cleanup & Extraction
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Flood Damage Restoration
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
Basement Water Damage Restoration
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Structural Drying and Dehumidification
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Water Damage Repair and Restoration
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Midwest
How storms and basements shape water damage in Fidelity
Weather
Severe storms and hard winters both cause trouble here. Spring and summer bring thunderstorms that drop inches of rain and overload sewers, and river flooding can follow days of heavy rain upstream. In winter, deep cold bursts pipes, and ice dams push meltwater through ceilings.
Buildings
If you've got a finished basement, you've got a lot to lose down there. A sump pump that stops in a power outage is the classic cause, followed closely by a floor drain backing up in a storm. Water heaters and washers often live in the basement as well.
Ground
When the ground's full, water pushes in from outside. Much of the soil here is dense clay, and there's nowhere else for it to go. Keeping downspouts well away from the walls and making sure the yard slopes away both take some of that pressure off.
Drying
A wet basement dries slowly, because it's cool, low and closed in. Specialists set air movers low along the walls, run dehumidifiers sized for the space and check the concrete and framing each day until the readings come down.
When you call
How a Fidelity water job goes after you call
The call itself is short. Tell us your address in Fidelity, what got wet and if it's still coming in. We'll connect you with a restoration specialist from our network who covers Jasper County, and they'll tell you what they can do and when. It doesn't matter if it's a house, a rental or a business.
Before any equipment goes in, the specialist needs to know two things: how far the water got, and how dirty it is. Thermal cameras and moisture meters answer the first. For the second, there are three answers: Category 1, clean water, Category 2, dirty water, or Category 3, sewage and floodwater. With Category 3, plastic containment goes up and negative air machines with HEPA filters keep your house's air clean.
Then comes the drying, and this is the part people underestimate. Standing water comes out first, with truck-mounted or portable units. Air movers then push moist air off wet surfaces, while low grain refrigerant (LGR) dehumidifiers pull the water out of the air. If your house runs cold or the materials are dense, desiccant units can take over. Each day, readings of temperature and humidity, known as psychrometric readings, show whether the machines are keeping up.
So how do you know it's done? It's done when the numbers say so. A dry baseline from untouched materials in your house is the target, and each wet area has to reach it before the equipment leaves. It follows the IICRC S500 standard, and you get a record of the readings for your insurance claim.
What comes out and what stays in a Fidelity home
Most people expect to lose more than they do. Carpet that's only had clean water on it can usually be dried, though the pad underneath gets replaced. Drying mats can bring cupped hardwood back, given time. Walls often need only a flood cut, where the bottom of the drywall comes off and new board goes in.
If it was sewage or floodwater, porous things usually can't be saved. Carpet, pad and soaked insulation go in the dumpster, and studs and hard floors get cleaned and disinfected. Keep clear of any gas appliance that was underwater, and of any floor with a bit of bounce, until a professional has checked them.
Where we take calls around Fidelity
Wherever you are in Fidelity, the number's the same. We'll connect you with a specialist working in Jasper County, for a home or a commercial building.
ZIP codes in Fidelity
- 64836
Fidelity water damage questions
How fast can someone get to me in Fidelity?
Often within hours. Our network covers Jasper County, and we'll look for whoever can reach you soonest. Storms are the exception, because every crew in the area gets busy, so please don't wait to see if it gets worse.
Can I clean up water damage myself?
Small and clean, yes. Large or dirty, no. A shop vac and fans can deal with a little water on a hard surface, but they won't reach what's soaked into drywall and subfloor. That hidden moisture is where mold and rot get started.
How long does it take to dry out a house?
Usually three to five days for the drying alone. The specialist can tell you more after the first readings. Materials such as hardwood, plaster and concrete hold on to water longer, and repairs can only begin when they're dry.
Can wet hardwood floors and carpet be saved?
Often, yes, if drying starts quickly. Hardwood can come back with floor drying mats and slow, controlled drying, though it may cup for a while and need refinishing. Carpet soaked by clean water can usually be saved with a new pad. Carpet that sewage or floodwater touched has to go.
Will my insurance pay for water damage?
It usually depends on where the water came from. A homeowners policy usually covers a burst pipe. Outside flooding needs separate flood insurance, and sewer backup often needs an add-on. It's worth reading your policy, and it's worth having those photos.
Still dripping in Fidelity? Call us
(888) 596-0163Tell us what's happening, and we'll line up a specialist from our network in Jasper County. That's all you need to do for now.