Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water Damage Restoration in Stillwater, MN
Maybe a pipe let go, maybe the storm found a way in. Either way, you don't have to sort this out alone. Call us from Stillwater, Minnesota, and we'll put you in touch with a restoration specialist from our network, with truck-mounted extraction and dehumidifiers for the drying that follows.
Call Now: (888) 596-0163Someone picks up, day or night.
Water in Stillwater by the numbers
Washington County, Minnesota. Public records, linked in each box.- Source: ACS 2023 5-year, table B25035
- 1982Half of the housing around Stillwater went up before this
That's newer than 70% of the 28,807 US places we track. Newer doesn't mean leak-proof, though. It only changes what's likely to fail.
- Source: NOAA 1991-2020 Climate Normals, station USC00218037
- 35.1 inInches of rain and melted snow in a normal year
That's drier than 68% of the 30,291 places we track. Low totals can fool you. Roofs and drains get little practice here, so problems tend to show up all at once in the one big storm.
- Source: NOAA 1991-2020 Climate Normals, station USC00218037
- JUNThe wettest part of the year here: June
A look at the roof, gutters and downspouts before June is the cheapest repair you'll ever make.
- Source: OpenFEMA Disaster Declarations Summaries v2, 2016-01-01 to 2026-10-31
- 5Of 9 federal disaster declarations for Washington County since 2016, this many were weather or water
- Flood4
- Straight-Line Winds1
Floods top this list, and flood damage needs its own kind of cleanup, because of what the water carries in. Not counted here: 4 more for things like fires or the pandemic.
Before anyone arrives
Water in your Stillwater home? Start here
These are the steps that help most before anyone gets there. Do what you safely can.
Shut off the water
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
Stay clear of the power
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Take pictures first
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Rescue what you can
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
Let the air move
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
Call Now: (888) 596-0163
You've got about 24 to 48 hours to start drying before rot and mold become the bigger problem.
Typical build year
The usual weak spots in Stillwater homes
Your home is too new for rusted steel pipe, but it may be just the right age for polybutylene, the gray plastic line used in many houses until the mid 1990s. It doesn't give much warning before it lets go.
The other usual suspects in a house this age are the second or third water heater, the supply lines under the toilets and the ice maker line behind the fridge. All of them are cheap to replace and expensive to ignore.
Call Now: (888) 596-0163
From first call to final repair in Stillwater
Water Damage Cleanup & Extraction
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Flood Damage Restoration
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
Basement Water Damage Restoration
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Structural Drying and Dehumidification
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Water Damage Repair and Restoration
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Midwest
What's different about water damage in Stillwater
Weather
Severe storms and hard winters both cause trouble here. Spring and summer bring thunderstorms that drop inches of rain and overload sewers, and river flooding can follow days of heavy rain upstream. In winter, deep cold bursts pipes, and ice dams push meltwater through ceilings.
Buildings
The basement is usually where it happens. Block walls can seep, the sump pump may fail just when you need it and the floor drain can run backward in a storm. A battery backup on the pump is one of the best small things you can buy.
Ground
Heavy clay and glacial till hold water close to the foundation. After long rain, the pressure pushes it through cracks and the joint where the walls meet the floor. That's why basements leak here even without any plumbing fault.
Drying
Basement air doesn't go anywhere by itself. So the drying has to create the movement, with air movers along the walls and floor, and big dehumidifiers running nonstop. Concrete and block give up water slowly, so basement drying takes patience.
When you call
How a water damage job works in Stillwater
First we'll want to know three things: where you are in Stillwater, where the water came from and if it's stopped. From there, we'll connect you with a local specialist from our network, so you're speaking to someone who works in Washington County. That goes for homeowners, landlords and businesses alike.
Water travels through walls without leaving a mark, so the first step is measuring, not mopping. A thermal camera and moisture meters map the wet area. Next comes the question of what's in the water. Category 1 is clean supply water. Category 2 has been in contact with something, like a dishwasher overflow. Category 3 is sewage or floodwater, and it calls for containment: plastic sheeting, plus negative air machines with HEPA filters, so nothing spreads through the house.
Then comes the drying, and this is the part people underestimate. Standing water comes out first, with truck-mounted or portable units. Air movers then push moist air off wet surfaces, while low grain refrigerant (LGR) dehumidifiers pull the water out of the air. If your house runs cold or the materials are dense, desiccant units can take over. Each day, readings of temperature and humidity, known as psychrometric readings, show whether the machines are keeping up.
The finish line isn't when things look dry. Readings from dry wood and drywall in your own house set the target, called the dry standard, and the equipment stays until the wet areas reach it. That's the IICRC S500 standard for water damage at work, and those daily records are what your insurance company wants to see.
Can it be saved? A guide for Stillwater homes
Most people expect to lose more than they do. Carpet that's only had clean water on it can usually be dried, though the pad underneath gets replaced. Drying mats can bring cupped hardwood back, given time. Walls often need only a flood cut, where the bottom of the drywall comes off and new board goes in.
The exception is dirty water. Whatever soft material sewage or floodwater touched has to be removed, and the rest gets an antimicrobial cleaning. Don't relight a gas heater or water heater that sat in water, and if a floor feels soft, stay off it and mention it on the call.
Where we take calls around Stillwater
Wherever you are in Stillwater, the number's the same. We'll connect you with a specialist working in Washington County, for a home or a commercial building.
ZIP codes in Stillwater
- 55082
- 55083
Common water damage questions in Stillwater
How fast can someone get to me in Stillwater?
It depends on the time and the weather, but same-day help is what we aim for, and it's often a matter of hours. The local specialist will give you a time on the phone, so you're not left guessing.
Can I clean up water damage myself?
If it's small, clean and caught quickly, go ahead. If it has been sitting, has gone under the floor or smells bad, that's the time to call. The trouble with doing it yourself is that everything can look dry on top and still be wet underneath.
How long does it take to dry out a house?
Most homes take three to five days of drying once the water's out. Dense materials such as hardwood and plaster can take longer, and any rebuilding comes afterward.
Can wet hardwood floors and carpet be saved?
It depends on time and on the water. For hardwood, floor drying panels and patience can do a lot, though refinishing may still be needed. For carpet, clean water usually means new pad and the same carpet. Contaminated water means replacing both.
Will my insurance pay for water damage?
Often, but not always. Insurers tend to pay for sudden leaks and not for long-term seepage. Flooding from outside needs its own policy. Call your insurance company early, and keep the moisture logs and photos, since they make the claim much easier.
Still dripping in Stillwater? Call us
(888) 596-0163Tell us what's happening, and we'll line up a specialist from our network in Washington County. That's all you need to do for now.