Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
A leak at 2 a.m. doesn't wait for business hours, and neither do we. If water's getting into your home or business in North Branch, Minnesota, call and we'll line up a nearby specialist who brings the extraction gear and dehumidifiers to deal with it properly.
Call Now: (888) 596-0163Someone picks up, day or night.
Homes around North Branch are newer than in 90% of the 28,807 places we track, which changes what tends to go wrong more than whether it does.
Around 73% of the 30,291 places we track get more than this. Less rain doesn't mean less risk indoors. Most damage here starts with plumbing, and when a big storm does come, dry ground doesn't soak it up.
A look at the roof, gutters and downspouts before July is the cheapest repair you'll ever make.
Floods top this list, and flood damage needs its own kind of cleanup, because of what the water carries in. We've left out 4 for other causes, such as fire or the pandemic.
Before anyone arrives
No need to get it perfect. These are the things that make the biggest difference, in order.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
Mold can get started within 24 to 48 hours, so it's worth calling even if the worst seems over.
Typical build year
If your house dates from the late 1970s to the mid 1990s, take a look at the pipes. Polybutylene went into a lot of homes in those years. It's gray plastic, and it has a habit of failing with no warning. You can often spot it at the water heater or under a sink.
Then there's the water heater itself. Most tanks last 8 to 12 years, so a house this age is probably on its second or third, and yours may be getting close. If you see polybutylene, it's worth asking a plumber about it, even if nothing's leaking yet.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Midwest
Severe storms and hard winters both cause trouble here. Spring and summer bring thunderstorms that drop inches of rain and overload sewers, and river flooding can follow days of heavy rain upstream. In winter, deep cold bursts pipes, and ice dams push meltwater through ceilings.
If you've got a finished basement, you've got a lot to lose down there. A sump pump that stops in a power outage is the classic cause, followed closely by a floor drain backing up in a storm. Water heaters and washers often live in the basement as well.
Clay doesn't drain, so after a wet week, water builds up against your basement walls, and it will find the crack. That pressure is known as hydrostatic pressure. If the water comes in along the bottom of the wall, that's usually what you're looking at.
Basement air doesn't go anywhere by itself. So the drying has to create the movement, with air movers along the walls and floor, and big dehumidifiers running nonstop. Concrete and block give up water slowly, so basement drying takes patience.
When you call
We'll ask where you are, what happened and whether the water's still running. That takes a couple of minutes. Then we'll connect you with a specialist from our network who works in Chisago County, and you can ask them when they can be there before you hang up. Homes and commercial buildings are both fine.
When the specialist arrives, the first job is finding where the water went, because that's rarely where it's pooled. Thermal cameras and moisture meters show how far it has traveled behind walls. They'll also work out what kind of water it is. Category 1 is clean water from a supply line, Category 2 is dirty, like a washer overflow, and Category 3 is sewage or floodwater. Category 3 means sealing the area with plastic, called containment, and running negative air machines with HEPA filters to keep the dirty air away from the rest of your home.
Then comes the drying, and this is the part people underestimate. Standing water comes out first, with truck-mounted or portable units. Air movers then push moist air off wet surfaces, while low grain refrigerant (LGR) dehumidifiers pull the water out of the air. If your house runs cold or the materials are dense, desiccant units can take over. Each day, readings of temperature and humidity, known as psychrometric readings, show whether the machines are keeping up.
Nobody should take the machines away just because a wall feels dry. The target is the dry standard, measured from sound materials in your own home, and the job follows the IICRC S500 standard until the readings match. Ask for a copy of the daily log. Your insurer will want it.
More than you'd think, if it's caught early. Carpet soaked with clean water can often be dried in place once the pad's been pulled. Hardwood is worth trying to save too, with floor drying mats and slow drying, though it may need refinishing. Drywall that's wet only at the base can be cut a little above the waterline instead of being replaced to the ceiling, which is what a flood cut is.
Contaminated water is where the rules get strict. Sewage or floodwater means the carpet and pad come out, along with wet insulation, and what's left gets an antimicrobial treatment. It's also not safe to relight a gas appliance that's been underwater until someone's checked it, and a soft floor needs a look before anyone stands on it.
Wherever you are in North Branch, the number's the same. We'll connect you with a specialist working in Chisago County, for a home or a commercial building.
Often within hours. Our network covers Chisago County, and we'll look for whoever can reach you soonest. Storms are the exception, because every crew in the area gets busy, so please don't wait to see if it gets worse.
Small and clean, yes. Large or dirty, no. A shop vac and fans can deal with a little water on a hard surface, but they won't reach what's soaked into drywall and subfloor. That hidden moisture is where mold and rot get started.
Usually three to five days for the drying alone. The specialist can tell you more after the first readings. Materials such as hardwood, plaster and concrete hold on to water longer, and repairs can only begin when they're dry.
Usually, with clean water and a fast start. Drying mats sit on hardwood and draw the moisture out slowly so the boards don't split. Sanding and refinishing can fix any cupping that's left. Carpet needs a new pad, and it can't be saved at all after sewage or floodwater.
Many water losses are covered, so it's worth checking. The usual line is sudden versus gradual: a burst supply line is generally covered, and a slow drip often isn't. Flood damage needs a separate flood policy, and a sewer backup may need an extra rider.
The sooner drying starts, the less has to come out. One call gets a local specialist moving toward you.