Water Damage Restoration in Arlington, MN

Whatever got wet in your Arlington home, the next few hours matter more than the next few days. Call us and we'll find a restoration specialist from our network who works in Sibley County, Minnesota, and can get dehumidifiers and extraction equipment to you soon.

Call Now: (888) 596-0163

Someone picks up, day or night.

Gutted room with metal stud framing and new drywall sheets during water damage repairs

Water in Arlington by the numbers

Sibley County, Minnesota. Public records, linked in each box.
Source: ACS 2023 5-year, table B25035
1970
Half of the housing around Arlington went up before this

That's older than 56% of the 28,807 US places we track. Older homes often have pipes and drains that have been patched more than once.

Source: NOAA 1991-2020 Climate Normals, station USC00211065
31.7 in
Inches of precipitation in a normal year, rain and snow together

That's drier than 74% of the 30,291 places we track. Dry places aren't off the hook. Hard ground sheds water fast, so one big storm can run straight to your door.

Source: NOAA 1991-2020 Climate Normals, station USC00211065
JUN
Most precipitation of the year comes in June

A look at the roof, gutters and downspouts before June is the cheapest repair you'll ever make.

Source: OpenFEMA Disaster Declarations Summaries v2, 2016-01-01 to 2026-10-31
6
Weather or water disasters out of 10 federal declarations for Sibley County since 2016
  • Flood5
  • Straight-Line Winds1

Floods top this list, and flood damage needs its own kind of cleanup, because of what the water carries in. That leaves out 4 for causes such as fire or the pandemic.

Before anyone arrives

The first hour after a leak in Arlington

No need to get it perfect. These are the things that make the biggest difference, in order.

  1. Shut off the water

    Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.

  2. Stay clear of the power

    If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.

  3. Take pictures first

    Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.

  4. Rescue what you can

    Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.

  5. Let the air move

    If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.

Call Now: (888) 596-0163

Mold can get started within 24 to 48 hours, so it's worth calling even if the worst seems over.

Typical build year

What tends to fail in Arlington houses like yours

Homes from these decades often still have their first galvanized pipes, or a mix of galvanized and newer copper. Where those two metals meet is a common place for a leak to start. Some homes from the middle of this period also have sewer lines made of a tar-paper pipe called Orangeburg, which sags and collapses with age.

Look where pipes join around the water heater and under sinks, and check for rust or green crust. Slow drains in several rooms are worth a sewer camera, and that's a lot cheaper than a backup.

Call Now: (888) 596-0163
Gloved hands fitting a threaded pipe to a radiator

Water damage services in Arlington

The Midwest

What's different about water damage in Arlington

Weather

Severe storms and hard winters both cause trouble here. Spring and summer bring thunderstorms that drop inches of rain and overload sewers, and river flooding can follow days of heavy rain upstream. In winter, deep cold bursts pipes, and ice dams push meltwater through ceilings.

Buildings

Most homes have full basements, and many are finished with carpet, drywall and furniture. Poured concrete or block walls can seep under pressure, floor drains can back up during storms, and a failed sump pump can put inches of water on the floor overnight.

Ground

When the ground's full, water pushes in from outside. Much of the soil here is dense clay, and there's nowhere else for it to go. Keeping downspouts well away from the walls and making sure the yard slopes away both take some of that pressure off.

Drying

Basement air doesn't go anywhere by itself. So the drying has to create the movement, with air movers along the walls and floor, and big dehumidifiers running nonstop. Concrete and block give up water slowly, so basement drying takes patience.

When you call

From phone call to dry house in Arlington

First we'll want to know three things: where you are in Arlington, where the water came from and if it's stopped. From there, we'll connect you with a local specialist from our network, so you're speaking to someone who works in Sibley County. That goes for homeowners, landlords and businesses alike.

Expect a walk through the house with a thermal camera and a moisture meter, because what you can see is usually only part of it. The specialist will also tell you which of the three categories you've got. Category 1 water is clean, Category 2 is dirty, and Category 3 is sewage or floodwater. That last one changes the job, with plastic containment around the work area and negative air machines pushing air through HEPA filters.

Then comes the drying, and this is the part people underestimate. Standing water comes out first, with truck-mounted or portable units. Air movers then push moist air off wet surfaces, while low grain refrigerant (LGR) dehumidifiers pull the water out of the air. If your house runs cold or the materials are dense, desiccant units can take over. Each day, readings of temperature and humidity, known as psychrometric readings, show whether the machines are keeping up.

Looking dry and being dry are two different things. The specialist takes moisture readings from unaffected parts of your home to set a dry standard, and the machines keep going until everything wet matches it. That's how the IICRC S500 guidance says to do it, and the daily log gives your insurer the proof it asks for.

Call Now: (888) 596-0163

What can be saved in a Arlington home

It depends mostly on how fast drying starts and how dirty the water was. With clean water, carpet can usually stay and the pad goes. Hardwood often comes back with drying mats and patience, and sanding can take care of what's left. Walls may only need a flood cut, which removes the bottom section of drywall, so the rest stays put.

The exception is dirty water. Whatever soft material sewage or floodwater touched has to be removed, and the rest gets an antimicrobial cleaning. Don't relight a gas heater or water heater that sat in water, and if a floor feels soft, stay off it and mention it on the call.

Arlington and the rest of Sibley County

From one end of Arlington to the other, and on through Sibley County, the first step is the same call. Homes and businesses are both covered.

ZIP codes in Arlington

  • 55307

More Minnesota towns we serve

What people in Arlington ask us

How fast can someone get to me in Arlington?

Usually the same day, and often within a few hours. It depends on who's closest and how busy Sibley County is. If a storm has just gone through, everyone's calling at once, so call as soon as you can.

Can I clean up water damage myself?

Some of it, yes. A bit of clean water on tile is a job for a mop and a fan. It's different when water has got under the flooring or into a wall, or when it's dirty. Household fans can't dry a wall cavity, and sewage isn't safe to handle.

How long does it take to dry out a house?

Usually three to five days for the drying alone. The specialist can tell you more after the first readings. Materials such as hardwood, plaster and concrete hold on to water longer, and repairs can only begin when they're dry.

Can wet hardwood floors and carpet be saved?

Usually, with clean water and a fast start. Drying mats sit on hardwood and draw the moisture out slowly so the boards don't split. Sanding and refinishing can fix any cupping that's left. Carpet needs a new pad, and it can't be saved at all after sewage or floodwater.

Will my insurance pay for water damage?

Many water losses are covered, so it's worth checking. The usual line is sudden versus gradual: a burst supply line is generally covered, and a slow drip often isn't. Flood damage needs a separate flood policy, and a sewer backup may need an extra rider.

Still dripping in Arlington? Call us

(888) 596-0163

Tell us what's happening, and we'll line up a specialist from our network in Sibley County. That's all you need to do for now.

Call Now: (888) 596-0163