Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water in the house? Call now, and we'll find you a local specialist.
Whatever got wet in your Velpen home, the next few hours matter more than the next few days. Call us and we'll find a restoration specialist from our network who works in Pike County, Indiana, and can get dehumidifiers and extraction equipment to you soon.
Call Now: (888) 596-0163Someone picks up, day or night.
Velpen gets more than 86% of the 30,291 places on our list. A normal year here brings enough water to find any weak spot in a roof or along a foundation wall.
A look at the roof, gutters and downspouts before May is the cheapest repair you'll ever make.
Flooding leads the list here. Floodwater is never clean, so anything it touches needs more than drying. That leaves out 2 for causes such as fire or the pandemic.
Before anyone arrives
A few minutes now can save days of drying later. If something doesn't feel safe, skip it and tell us when you call.
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
The clock on mold is roughly 24 to 48 hours, which is why we'd rather hear from you early.
We couldn't find a reliable build year for this area, but the same few things cause most indoor leaks wherever you are: water heaters past 8 to 12 years, old washer hoses, ice maker lines, and the flexible connectors under toilets and sinks.
Take twenty minutes to look at each one, and make sure everyone at home knows where the main valve is. That one piece of knowledge can be the difference between a wet floor and a wet house.
Call Now: (888) 596-0163
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Midwest
Severe storms and hard winters both cause trouble here. Spring and summer bring thunderstorms that drop inches of rain and overload sewers, and river flooding can follow days of heavy rain upstream. In winter, deep cold bursts pipes, and ice dams push meltwater through ceilings.
If you've got a finished basement, you've got a lot to lose down there. A sump pump that stops in a power outage is the classic cause, followed closely by a floor drain backing up in a storm. Water heaters and washers often live in the basement as well.
Clay doesn't drain, so after a wet week, water builds up against your basement walls, and it will find the crack. That pressure is known as hydrostatic pressure. If the water comes in along the bottom of the wall, that's usually what you're looking at.
Basement air doesn't go anywhere by itself. So the drying has to create the movement, with air movers along the walls and floor, and big dehumidifiers running nonstop. Concrete and block give up water slowly, so basement drying takes patience.
When you call
It starts with a few quick questions: your address, what happened and how long it's been wet. Then we'll connect you with someone from our network who works in Pike County. Your own home, a rental or a business, you'll know what's next before the call ends.
The first hour is mostly detective work. Using thermal imaging and moisture meters, the specialist traces the water through walls and floors. Then they'll sort it into Category 1, 2 or 3, from clean supply line water to sewage or floodwater. If it's Category 3, they'll seal the area with plastic sheeting and set up negative air with HEPA filtration, so the contaminated air stays put.
Drying is a process, and you'll have strange machines in the house for a few days. The bulk of the water goes first, by truck-mounted or portable extractor. Air movers then lift moisture off surfaces, and low grain refrigerant (LGR) dehumidifiers remove it from the air. A cold building or dense material may need desiccant units instead. Daily psychrometric readings show if the air is still pulling water out.
Looking dry and being dry are two different things. The specialist takes moisture readings from unaffected parts of your home to set a dry standard, and the machines keep going until everything wet matches it. That's how the IICRC S500 guidance says to do it, and the daily log gives your insurer the proof it asks for.
It depends mostly on how fast drying starts and how dirty the water was. With clean water, carpet can usually stay and the pad goes. Hardwood often comes back with drying mats and patience, and sanding can take care of what's left. Walls may only need a flood cut, which removes the bottom section of drywall, so the rest stays put.
The exception is dirty water. Whatever soft material sewage or floodwater touched has to be removed, and the rest gets an antimicrobial cleaning. Don't relight a gas heater or water heater that sat in water, and if a floor feels soft, stay off it and mention it on the call.
We take calls from all over Velpen and the rest of Pike County, for houses, apartments and commercial buildings. If you're not sure you're close enough, just ask.
Usually the same day, and often within a few hours. It depends on who's closest and how busy Pike County is. If a storm has just gone through, everyone's calling at once, so call as soon as you can.
If it's small, clean and caught quickly, go ahead. If it has been sitting, has gone under the floor or smells bad, that's the time to call. The trouble with doing it yourself is that everything can look dry on top and still be wet underneath.
Usually three to five days for the drying alone. The specialist can tell you more after the first readings. Materials such as hardwood, plaster and concrete hold on to water longer, and repairs can only begin when they're dry.
It depends on time and on the water. For hardwood, floor drying panels and patience can do a lot, though refinishing may still be needed. For carpet, clean water usually means new pad and the same carpet. Contaminated water means replacing both.
It usually depends on where the water came from. A homeowners policy usually covers a burst pipe. Outside flooding needs separate flood insurance, and sewer backup often needs an add-on. It's worth reading your policy, and it's worth having those photos.
The sooner drying starts, the less has to come out. One call gets a local specialist moving toward you.