Emergency Water Damage Restoration
This is the call for water that's coming in right now. We get a local specialist on the way to stop the source, pull the water out and start drying the same day.
Call Now: (888) 596-0163Water Damage Restoration in Arlington Heights, IL
Maybe a pipe let go, maybe the storm found a way in. Either way, you don't have to sort this out alone. Call us from Arlington Heights, Illinois, and we'll put you in touch with a restoration specialist from our network, with truck-mounted extraction and dehumidifiers for the drying that follows.
Call Now: (888) 596-0163Someone picks up, day or night.
Arlington Heights's water file
Cook County, Illinois. Public records, linked in each box.- Source: ACS 2023 5-year, table B25035
- 1973Half of the housing around Arlington Heights went up before this
Housing here is newer than in 49% of the 28,807 places on our list. So you're less likely to have old pipes, and more likely to have plastic lines and fittings that are starting to age.
- Source: NOAA 1991-2020 Climate Normals, station US1ILCK0121
- 37.3 inInches of rain and melted snow in a normal year
That's drier than 63% of the 30,291 places we track. Less rain doesn't mean less risk indoors. Most damage here starts with plumbing, and when a big storm does come, dry ground doesn't soak it up.
- Source: NOAA 1991-2020 Climate Normals, station US1ILCK0121
- JUNOn average, the most rain and snow falls in June
A look at the roof, gutters and downspouts before June is the cheapest repair you'll ever make.
- Source: OpenFEMA Disaster Declarations Summaries v2, 2016-01-01 to 2026-10-31
- 3Federal weather or water disasters in Cook County since 2016, out of 5 declarations in all
- Flood2
- Severe Storm1
Floods top this list, and flood damage needs its own kind of cleanup, because of what the water carries in. That leaves out 2 for causes such as fire or the pandemic.
Before anyone arrives
What to do right now in Arlington Heights
A few minutes now can save days of drying later. If something doesn't feel safe, skip it and tell us when you call.
Shut off the water
Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.
Stay clear of the power
If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.
Take pictures first
Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.
Rescue what you can
Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.
Let the air move
If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.
Call Now: (888) 596-0163
Mold can get started within 24 to 48 hours, so it's worth calling even if the worst seems over.
Typical build year
Where to look first in a Arlington Heights home of this age
Homes from these decades often still have their first galvanized pipes, or a mix of galvanized and newer copper. Where those two metals meet is a common place for a leak to start. Some homes from the middle of this period also have sewer lines made of a tar-paper pipe called Orangeburg, which sags and collapses with age.
Look where pipes join around the water heater and under sinks, and check for rust or green crust. Slow drains in several rooms are worth a sewer camera, and that's a lot cheaper than a backup.
Call Now: (888) 596-0163
How we can help in Arlington Heights
Water Damage Cleanup & Extraction
The more water that comes out at this stage, the less has to be dried later. Pumps and extraction units clear carpet, pad, hardwood and tile, then everything the water touched gets cleaned.
Call Now: (888) 596-0163
Flood Damage Restoration
Floodwater is never clean. It carries soil and sewage, so mud and silt get cleared, soaked drywall and insulation get cut out, and what stays gets disinfected.
Call Now: (888) 596-0163
Basement Water Damage Restoration
If your home has a basement, a failed sump pump or a backed-up drain can fill it fast. It gets pumped out, the concrete and block get dried, and someone finds out how the water got in.
Call Now: (888) 596-0163
Structural Drying and Dehumidification
Air movers and dehumidifiers run until the meters say your walls, subfloor and framing are back to normal. Not until they look dry. Until the readings prove it.
Call Now: (888) 596-0163
Water Damage Repair and Restoration
Once the structure is dry, the drywall, flooring, trim and paint go back. You'll have photos and notes for your claim along the way.
Call Now: (888) 596-0163The Midwest
Why water behaves differently in Arlington Heights
Weather
Severe storms and hard winters both cause trouble here. Spring and summer bring thunderstorms that drop inches of rain and overload sewers, and river flooding can follow days of heavy rain upstream. In winter, deep cold bursts pipes, and ice dams push meltwater through ceilings.
Buildings
The basement is usually where it happens. Block walls can seep, the sump pump may fail just when you need it and the floor drain can run backward in a storm. A battery backup on the pump is one of the best small things you can buy.
Ground
Heavy clay and glacial till hold water close to the foundation. After long rain, the pressure pushes it through cracks and the joint where the walls meet the floor. That's why basements leak here even without any plumbing fault.
Drying
A basement has no real airflow and hangs on to cool, damp air. So the air has to be pushed. Air movers run low and fast over the floor, and large dehumidifiers keep pulling the water out of the bottom of your walls.
When you call
How a Arlington Heights water job goes after you call
It starts with a few quick questions: your address, what happened and how long it's been wet. Then we'll connect you with someone from our network who works in Cook County. Your own home, a rental or a business, you'll know what's next before the call ends.
Water travels through walls without leaving a mark, so the first step is measuring, not mopping. A thermal camera and moisture meters map the wet area. Next comes the question of what's in the water. Category 1 is clean supply water. Category 2 has been in contact with something, like a dishwasher overflow. Category 3 is sewage or floodwater, and it calls for containment: plastic sheeting, plus negative air machines with HEPA filters, so nothing spreads through the house.
Most of the job is drying, and it's slower than people expect. Extraction units, often truck-mounted, take out the bulk water. Air movers and low grain refrigerant (LGR) dehumidifiers then do the long, loud work of pulling moisture out of walls and floors. Desiccant units come in when it's too cold or the materials are too dense for LGR machines. Psychrometric readings, which are daily checks of temperature and humidity, tell the specialist if the setup needs changing.
A wall can feel dry and still hold plenty of water. That's why the specialist measures a dry standard from unaffected wood and drywall nearby and keeps the equipment running until the wet areas match. This is the method in the IICRC S500 standard, and those moisture logs back up your insurance claim.
What you can save and what has to go in Arlington Heights
A lot of it can stay if you move quickly. If the water was clean, the carpet is often fine once the pad is replaced. Hardwood needs slow, careful drying with mats, and it may want refinishing at the end. Drywall is the easy one: a flood cut takes off the wet part, a little above the waterline, and the top of the wall is untouched.
The exception is dirty water. Whatever soft material sewage or floodwater touched has to be removed, and the rest gets an antimicrobial cleaning. Don't relight a gas heater or water heater that sat in water, and if a floor feels soft, stay off it and mention it on the call.
Our Arlington Heights service area
Our network covers Arlington Heights and the towns around it in Cook County. That includes homes, rentals and businesses, day or night.
ZIP codes in Arlington Heights
- 60005
- 60004
What people in Arlington Heights ask us
How fast can someone get to me in Arlington Heights?
We aim to have a specialist on the way the same day, often within hours. When a big storm hits all of Cook County at once, it can take longer, so it pays to call early. The steps above will help while you wait.
Can I clean up water damage myself?
Small and clean, yes. Large or dirty, no. A shop vac and fans can deal with a little water on a hard surface, but they won't reach what's soaked into drywall and subfloor. That hidden moisture is where mold and rot get started.
How long does it take to dry out a house?
Plan on several days. Three to five is typical, though a small, fresh leak may be quicker and a large flood may take over a week. The readings decide when it's done, not the calendar.
Can wet hardwood floors and carpet be saved?
Quite often. Floor mats and steady air can save hardwood that would otherwise be torn out, so tell the specialist about it first thing. With carpet, it all depends on the water: clean means dry it and replace the pad, sewage or floodwater means it comes out.
Will my insurance pay for water damage?
It usually depends on where the water came from. A homeowners policy usually covers a burst pipe. Outside flooding needs separate flood insurance, and sewer backup often needs an add-on. It's worth reading your policy, and it's worth having those photos.
Get help in Arlington Heights now
(888) 596-0163It's quick. Give us your address, and we'll connect you with a local specialist who can tell you when they'll be there.