Water Damage Restoration in High Springs, FL

Water where it shouldn't be gets stressful fast, and it keeps spreading while you work out what to do. If it's a burst pipe, a soaked ceiling or storm water at the door in High Springs, Florida, call us. We'll get a specialist from our network of local restoration companies moving toward you, with extraction equipment and dehumidifiers.

Call Now: (888) 596-0163

Someone picks up, day or night.

Gutted room with metal stud framing and new drywall sheets during water damage repairs

High Springs's water file

Alachua County, Florida. Public records, linked in each box.
Source: ACS 2023 5-year, table B25035
1999
The middle year for homes around High Springs. Half are older

Housing here is newer than in 93% of the 28,807 places on our list. So you're less likely to have old pipes, and more likely to have plastic lines and fittings that are starting to age.

Source: NOAA 1991-2020 Climate Normals, station USC00083956
51.7 in
Inches of precipitation in a normal year, rain and snow together

That's wetter than 84% of the 30,291 places we track. That's plenty of water to find a tired roof, a blocked downspout or a low spot by the foundation.

Source: NOAA 1991-2020 Climate Normals, station USC00083956
AUG
On average, the most rain and snow falls in August

If you've been meaning to clear the gutters, do it before August comes around.

Source: OpenFEMA Disaster Declarations Summaries v2, 2016-01-01 to 2026-10-31
26
Federal weather or water disasters in Alachua County since 2016, out of 30 declarations in all
  • Hurricane19
  • Tropical Storm6
  • Severe Storm1

Hurricanes and tropical storms lead the list here. Wind opens up the roof, and then the rain comes in behind it. Not counted here: 4 more for things like fires or the pandemic.

Before anyone arrives

What to do first if you're in High Springs

No need to get it perfect. These are the things that make the biggest difference, in order.

  1. Shut off the water

    Look for the main valve near the meter or where the line comes into the house, and turn it slowly, since older valves can stick. If it's one fixture, its own shutoff valve will do.

  2. Stay clear of the power

    If you can reach the breaker panel without stepping in water, switch off the wet rooms. If you can't, leave it alone, stay out of the water and tell us when you call.

  3. Take pictures first

    Before you clean up, photograph the water, where it came from and whatever it damaged. Your insurance company will ask, and you only get one chance at those shots.

  4. Rescue what you can

    Move rugs, papers, photos and electronics to a dry room, and prop furniture up off the wet floor. Everything else can wait.

  5. Let the air move

    If the water is clean and the power's safe, open interior doors and run the fans you have. Stay out if it's sewage or floodwater, and keep that air away from the rest of the house.

Call Now: (888) 596-0163

The clock on mold is roughly 24 to 48 hours, which is why we'd rather hear from you early.

Typical build year

Where to look first in a High Springs home of this age

Homes from these years often had plastic plumbing put in, and one type stands out. Polybutylene, usually gray and often stamped PB, was widely used until the mid 1990s and is known for failing without warning, usually at the fittings.

Check the exposed lines near your water heater and under the sinks. While you're there, look at the tank's age on its label. Eight to twelve years is about all you can expect, and when one fails, it fails on the floor.

Call Now: (888) 596-0163
Gloved hands fitting a threaded pipe to a radiator

What our network handles around High Springs

The humid Southeast

Why water behaves differently in High Springs

Weather

Rain comes hard here, and it doesn't leave quickly. Afternoon storms overwhelm gutters, tropical weather can soak a whole county at once, and creeks in hill country rise in a hurry. The real problem comes afterward, when the warm, damp air slows drying and gives mold a head start.

Buildings

If your home has a crawlspace, it's worth a look. That's where a slow leak can sit for months, and a soft or musty floor is often the first sign. Pier-and-beam houses have the same issue. On slab homes, a slab leak may only show as damp flooring. And an air handler in the attic can leak right through the ceiling.

Ground

Soil here runs from coastal sand to red clay and limestone hills. Sand drains fast, but it sits over a high water table, so groundwater can come up into crawlspaces in a long wet spell. Inland, red clay sheds rain toward your foundation and holds it there.

Drying

You can't dry a house here by opening the windows. That just brings in more moisture. LGR dehumidifiers do the real work, running until your floor joists, studs and drywall have given up their water, and ideally before the warm air gives mold its chance.

When you call

How a water damage job works in High Springs

First we'll want to know three things: where you are in High Springs, where the water came from and if it's stopped. From there, we'll connect you with a local specialist from our network, so you're speaking to someone who works in Alachua County. That goes for homeowners, landlords and businesses alike.

Water travels through walls without leaving a mark, so the first step is measuring, not mopping. A thermal camera and moisture meters map the wet area. Next comes the question of what's in the water. Category 1 is clean supply water. Category 2 has been in contact with something, like a dishwasher overflow. Category 3 is sewage or floodwater, and it calls for containment: plastic sheeting, plus negative air machines with HEPA filters, so nothing spreads through the house.

Then comes the drying, and this is the part people underestimate. Standing water comes out first, with truck-mounted or portable units. Air movers then push moist air off wet surfaces, while low grain refrigerant (LGR) dehumidifiers pull the water out of the air. If your house runs cold or the materials are dense, desiccant units can take over. Each day, readings of temperature and humidity, known as psychrometric readings, show whether the machines are keeping up.

A wall can feel dry and still hold plenty of water. That's why the specialist measures a dry standard from unaffected wood and drywall nearby and keeps the equipment running until the wet areas match. This is the method in the IICRC S500 standard, and those moisture logs back up your insurance claim.

Call Now: (888) 596-0163

What can usually be saved in a High Springs home

It depends mostly on how fast drying starts and how dirty the water was. With clean water, carpet can usually stay and the pad goes. Hardwood often comes back with drying mats and patience, and sanding can take care of what's left. Walls may only need a flood cut, which removes the bottom section of drywall, so the rest stays put.

Things change when the water's dirty. Anything soft that sewage or floodwater reached, such as carpet, pad and insulation, gets thrown out. Hard surfaces get cleaned and treated. Have a professional look at any gas appliance that got wet before you turn it back on, and don't walk on a floor that's gone spongy.

High Springs and the rest of Alachua County

From one end of High Springs to the other, and on through Alachua County, the first step is the same call. Homes and businesses are both covered.

ZIP codes in High Springs

  • 32643
  • 32655

Other towns in Florida

Questions we hear from High Springs

How fast can someone get to me in High Springs?

Usually the same day, and often within a few hours. It depends on who's closest and how busy Alachua County is. If a storm has just gone through, everyone's calling at once, so call as soon as you can.

Can I clean up water damage myself?

Small and clean, yes. Large or dirty, no. A shop vac and fans can deal with a little water on a hard surface, but they won't reach what's soaked into drywall and subfloor. That hidden moisture is where mold and rot get started.

How long does it take to dry out a house?

Most homes take three to five days of drying once the water's out. Dense materials such as hardwood and plaster can take longer, and any rebuilding comes afterward.

Can wet hardwood floors and carpet be saved?

Usually, with clean water and a fast start. Drying mats sit on hardwood and draw the moisture out slowly so the boards don't split. Sanding and refinishing can fix any cupping that's left. Carpet needs a new pad, and it can't be saved at all after sewage or floodwater.

Will my insurance pay for water damage?

That's between you and your insurance company, but most policies cover sudden water damage from inside the home. Flood is separate, and sewer backup is often an add-on. Your best help is good records: photos from the start, plus the daily drying readings.

Need help with water in High Springs?

(888) 596-0163

The sooner drying starts, the less has to come out. One call gets a local specialist moving toward you.

Call Now: (888) 596-0163